Other Name: Seat Belt - Buckle Half; Seat Belt Receptacle, Front Center, Rear Left; Rear Belt Assembly Buckle; Latch; Seat Belt Buckle Half Center Buckle; Seat Belt Buckle Half Center Seat
Position: Front Center
Replaces: 5GW281D5AA
Item Weight: 1.00 Pounds
Item Dimensions: 12.2 x 3.1 x 1.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5GW281D5AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
Other Name: Seat Belt - Buckle Half; Seat Belt Receptacle, Front Center, Rear Left; Rear Belt Assembly Buckle; Latch; Seat Belt Buckle Half Center Buckle; Seat Belt Buckle Half Center Seat
Position: Front Center
Replaces: 5GW281J3AA
Item Weight: 0.80 Pounds
Item Dimensions: 12.3 x 2.8 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5GW281J3AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
Other Name: Seat Belt - Front Inner; Seat Belt Receptacle, Rear Right; Rear Belt Assembly Buckle; Latch; Front Inner Center Shoulder Belt Buckle; Front Center Seat.
Position: Inner Passenger Side
Replaces: 5HG321D5AD, 5HG321J3AD
Item Weight: 1.20 Pounds
Item Dimensions: 9.4 x 3.4 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5HG321X9AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
| Page 1 of 2 |Next >
1-20 of 34 Results
2009 Dodge Ram 2500 Seat Belt Parts and Q&A
Q: How Can Seat Belt and Child Restraint Anchor Services Be Made Safer on 2009 Dodge Ram 2500?
A: While performing a seat belt or child restraint anchor service, inspect all seat belts, buckles, anchor mounting parts, retractors, tether and anchor straps for any damage and replace any that are torn, straighten any twisted belts, tighten loose fasteners and swap damaged buckles, retractors, latch plates or anchor plates. If your child restraint anchors are bent or damaged, you should get new ones and never try to fix any seat belt or child restraint component; always replace parts with fresh, correct spares from the Chrysler Mopar Parts Catalog. The front center seat belt buckle is found in the middle of the car, while standard cab vehicles have a fixed position and unique black, key-type lower anchor on the right side of the front seat; for quad cab and mega cab models, it's all in the same location, but it's a front center seat lap belt instead. For installation, put the front center seat belt buckle, lap belt or anchor buckle unit over the side cushion's elastic strap. Place the lower anchor of the seat belt buckle beneath the side of the center seat and the edge of the outboard front seat with the belt webbing straight. Insert the lower anchor's anti-rotation tab into the coordinating hole on the center seat support bracket and secure it by inserting and tightening a screw up to 40 Nm (29 ft. lbs.). Attach the stowage tray where the box said, at the rear of the floor panel behind the seat in a standard cab.