How to Install a Wiper Switch on 2009 Dodge Ram 2500?

To install the multifunction switch, turn off the SRS by disconnecting the battery and waiting two minutes. Slide the switch into the housing and secure with screws and reconnect the wire harness. Assemble shrouds, tighten screws and re-attach tilt steering column knob, reconnect battery.

OEM 2009 Dodge Ram 2500 Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Switch found

View related parts
2009 Dodge Ram 2500 Turn Signal Switch Part Number: 56049823AB
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch; Air Bag Clockspring.; Multifunction Switch; Switch Housing; Ignition Housing; Clockspring; Switch Multifunction
- Replaces: 56045515AA, 56049823AA, 56045165AB
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.0 x 5.6 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049823AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10

2009 Dodge Ram 2500 Wiper Switch Parts and Q&A

Q: How to Install a Wiper Switch on 2009 Dodge Ram 2500?
A: To install the multifunction switch, turn off the SRS by disconnecting the battery and waiting two minutes. Slide the switch into the housing and secure with screws and reconnect the wire harness. Assemble shrouds, tighten screws and re-attach tilt steering column knob, reconnect battery.