Other Name: Absorber Kit - Suspension; Front Shock Absorber; Anti-lock Braking System Kit; Suspension Shock Absorber Set.; Shock; Shock Absorber Package Suspension Front; Shock Absorber Kit Suspension Front
Position: Front
Replaces: 5134155AB
Item Weight: 7.20 Pounds
Item Dimensions: 22.6 x 5.8 x 4.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5134155AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
| Page 1 of 2 |Next >
1-20 of 25 Results
2009 Dodge Ram 2500 Shock Absorber Parts and Q&A
Q: How to Properly Install a Shock Absorber with the Correct Nut Treatment on 2009 Dodge Ram 2500?
A: Put the shock absorber on the MacPherson strut and apply Mopar Lock 'N Seal or Loctite(R) 242 to the upper shock nut or replace the nut, if you don't have Loctite. Begin by fastening the lower retainer and grommet to the shock absorber stud and afterwards insert the shock absorber into the frame bracket hole. After that, set the lower bolts and use a 35 Nm (25 ft. lbs.) torque wrench to fasten them. Attach the upper grommet, the retainer (2) and your choice of new nut or the reused nut from Step 22 onto the shock shaft, then tighten the nut to 54 Nm (40 ft. lbs.) with Strut Nut Wrench 9362 (1). At the end, get rid of the support under the lower control arm outboard end, then detach and lower the vehicle.