How to Service and Repair a Steering Knuckle on 2009 Dodge Ram 2500?

The first step to servicing the steering knuckle is to support the vehicle, then proceed to take off the wheel and tire. After that, remove the brake caliper, rotor, shield and ABS wheel speed sensor if present. Open the tie rod end nut and use Remover 9360 to part the tie rod from the knuckle. Undo the upper ball joint nut and then use crowbar 8677 to separate the ball joint from the knuckle, being very careful not to damage the seal. Once done, take out the ball joint lower nut and use your puller to push the joint off the knuckle, then get the knuckle out. Then, remove the hub or bearing from the steering knuckle.

OEM 2009 Dodge Ram 2500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Knuckles found

View related parts
2009 Dodge Ram 2500 Knuckle, Front Passenger Side Part Number: 5086678AA
$398.90 MSRP: $896.00
You Save: $497.10 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Item Weight: 21.40 Pounds
- Item Dimensions: 14.7 x 14.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Knuckle, Front Driver Side Part Number: 68054495AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Item Weight: 24.90 Pounds
- Item Dimensions: 12.4 x 12.8 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68054495AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Knuckle, Front Driver Side Part Number: 5086679AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Item Weight: 21.00 Pounds
- Item Dimensions: 14.8 x 12.2 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086679AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Knuckle, Front Passenger Side Part Number: 68054494AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Item Weight: 23.30 Pounds
- Item Dimensions: 12.9 x 13.2 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68054494AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Knuckle, Front Passenger Side Part Number: 68032004AF
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right, Right; Knuckle Front
- Position: Front Passenger Side
- Replaces: 68032004AC, 68032004AA, 68032004AB, 68032004AD, 68032004AE
- Item Weight: 27.90 Pounds
- Item Dimensions: 16.9 x 12.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68032004AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Knuckle, Front Driver Side Part Number: 68032003AF
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left, Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 68032003AC, 68032003AD, 68032003AE, 68032003AB, 68032003AA
- Item Weight: 29.20 Pounds
- Item Dimensions: 17.1 x 14.4 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68032003AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS

2009 Dodge Ram 2500 Steering Knuckle Parts and Q&A

Q: How to Service and Repair a Steering Knuckle on 2009 Dodge Ram 2500?
A: The first step to servicing the steering knuckle is to support the vehicle, then proceed to take off the wheel and tire. After that, remove the brake caliper, rotor, shield and ABS wheel speed sensor if present. Open the tie rod end nut and use Remover 9360 to part the tie rod from the knuckle. Undo the upper ball joint nut and then use crowbar 8677 to separate the ball joint from the knuckle, being very careful not to damage the seal. Once done, take out the ball joint lower nut and use your puller to push the joint off the knuckle, then get the knuckle out. Then, remove the hub or bearing from the steering knuckle.