How to Install a MAP Sensor in the Intake Manifold on 2009 Dodge Ram 3500?

The Manifold Absolute Pressure (MAP) sensor is mounted on the front of the intake manifold air plenum. Clean the sensor mounting hole on the intake manifold, inspect the MAP sensor O-ring for cuts or tears, position the sensor, rotate it 1/4 turn clockwise to seat, then connect the electrical connector.

OEM 2009 Dodge Ram 3500 MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2009 Dodge Ram 3500 M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 3500 Sensor - Intake Manifold Part Number: 68282012AB
$321.77 MSRP: $476.00
You Save: $154.23 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR-INTAKE MANIFOLD
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68282012AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport | 6 Cyl 6.7 L DIESEL, 6.7L L6

2009 Dodge Ram 3500 MAP Sensor Parts and Q&A

Q: How to Install a MAP Sensor in the Intake Manifold on 2009 Dodge Ram 3500?
A: The Manifold Absolute Pressure (MAP) sensor is mounted on the front of the intake manifold air plenum. Clean the sensor mounting hole on the intake manifold, inspect the MAP sensor O-ring for cuts or tears, position the sensor, rotate it 1/4 turn clockwise to seat, then connect the electrical connector.