How to Service an Oil Pressure Switch on 2009 Jeep Commander?

At the beginning of the oil pressure sender service, pull out the negative battery cable. After that, lift the vehicle onto a hoist and take out the front splash shield. Following that, remove the connector from the oil pressure switch (4) and take out the pressure switch (2).

OEM 2009 Jeep Commander Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2009 Jeep Commander Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Switch - Oil Pressure Part Number: 5149097AB
$58.76 MSRP: $88.10
You Save: $29.34 (34%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149097AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Jeep Commander Submodels:
- Base, Limited, Sport | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2009 Jeep Commander Oil Pressure Switch Parts and Q&A

Q: How to Service an Oil Pressure Switch on 2009 Jeep Commander?
A: At the beginning of the oil pressure sender service, pull out the negative battery cable. After that, lift the vehicle onto a hoist and take out the front splash shield. Following that, remove the connector from the oil pressure switch (4) and take out the pressure switch (2).