How to Remove the Relay Block on 2009 Jeep Commander?

To remove the Junction Block, disable the air bag system by disconnecting the battery negative cable and waiting two minutes. Remove the steering column cover, disconnect the Junction Block connectors, unscrew it from the bracket, disengage the snap clips, and lower the Junction Block from the instrument panel.

OEM 2009 Jeep Commander Relay Block

Relay Fuse Box

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Relay Block found

View related parts
2009 Jeep Commander Junction Block Part Number: 68039117AA
Product Specifications
- Other Name: Block - Relay; Junction Boxes; Relay Boxes; Fuse Box; Junction Block Relay
- Item Weight: 3.40 Pounds
- Item Dimensions: 11.1 x 7.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68039117AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Relay Block Parts and Q&A

Q: How to Remove the Relay Block on 2009 Jeep Commander?
A: To remove the Junction Block, disable the air bag system by disconnecting the battery negative cable and waiting two minutes. Remove the steering column cover, disconnect the Junction Block connectors, unscrew it from the bracket, disengage the snap clips, and lower the Junction Block from the instrument panel.