How to Install a Radiator Support on 2009 Jeep Commander?

First, attach the upper radiator crossmember, then fasten the outer bolts firmly. Subsequently, attach the nuts to the radiator crossmember support for the latch, making sure they are snug enough so the torque measures 11 Nm (8 ft. lbs.). Enter the driver's side with a piece of fuel hose and slide down the grille assembly, then the hood seal. Finalize by making any changes to the hood if the fit isn't perfect.

OEM 2009 Jeep Commander Radiator Support

Center Radiator Support

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Radiator Support found

View related parts
2009 Jeep Commander Upper Tie Bar Brace Part Number: 55396492AB
Product Specifications
- Other Name: Crossmember - Radiator Crossmember; Radiator Support Tie Bar Brace; Brace Radiator Crossmember
- Item Weight: 1.30 Pounds
- Item Dimensions: 17.5 x 2.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396492AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Radiator Support Parts and Q&A

Q: How to Install a Radiator Support on 2009 Jeep Commander?
A: First, attach the upper radiator crossmember, then fasten the outer bolts firmly. Subsequently, attach the nuts to the radiator crossmember support for the latch, making sure they are snug enough so the torque measures 11 Nm (8 ft. lbs.). Enter the driver's side with a piece of fuel hose and slide down the grille assembly, then the hood seal. Finalize by making any changes to the hood if the fit isn't perfect.