How to Service and Repair the Track Bar on 2009 Jeep Commander?

Before working on the lateral stabilizer rod, raise and support the vehicle with a jack underneath the axle. Then, remove the track bar bolt 3 and nut 2 from the frame bracket and then take out the left lower shock bolt from the axle. Slide a screwdriver in between the coil springs and then take out the track bar bolt 3 and mounting nut 2 from the axle bracket.

OEM 2009 Jeep Commander Track Bar

Axle Track Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Track Bar found

View related parts
2009 Jeep Commander Track Bar, Rear Part Number: 52089605AD
Product Specifications
- Other Name: Trackbar - Rear; Suspension Track Bar, Rear; Track Bar Rear; Suspension Track Bar
- Position: Rear
- Item Weight: 8.10 Pounds
- Item Dimensions: 43.9 x 2.2 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52089605AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Track Bar Parts and Q&A

Q: How to Service and Repair the Track Bar on 2009 Jeep Commander?
A: Before working on the lateral stabilizer rod, raise and support the vehicle with a jack underneath the axle. Then, remove the track bar bolt 3 and nut 2 from the frame bracket and then take out the left lower shock bolt from the axle. Slide a screwdriver in between the coil springs and then take out the track bar bolt 3 and mounting nut 2 from the axle bracket.