How to Service and Repair a Left Front Shock Absorber on 2009 Jeep Commander?

Begin by mounting the clevis bracket (4) to the shock (3) and tightening it with 122 Nm (90 ft. lbs.) of force. Mount the shock assembly (3) to the vehicle and hold it by tightening the top four shock nuts (2) to 95 Nm (70 ft. lbs.). Then, fit all three PDC (1) bracket nuts and raise the vehicle. Place the lower stabilizer bolt (3) in the lower control arm and tighten it to 115 Nm (85 ft. lbs.). After that, position and tighten the lower clevis bolt (2) in the lower control arm to 169 Nm (125 ft. lbs.). After that, fit the upper ball joint into the knuckle (1) and turn the nut until you reach 75 Nm (55 ft. lbs.) of torque. Once done, put in the disc brake rotor and tighten the caliper adaptor mounting bolts with a torque of 176 Nm (130 ft. lbs.). Once you have the spacer, install the tire and wheel assembly before letting the vehicle down.

OEM 2009 Jeep Commander Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Shock Absorbers found

View related parts
2009 Jeep Commander Shock Absorber Part Number: 5166820AI
$246.42 MSRP: $376.00
You Save: $129.58 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber - Suspension; Strut and Shock Assembly Kit; Complete Strut; Shock.; Shock Absorber Package Suspension Front; Shock Absorber Kit Suspension Front
- Replaces: 5166820AF, 5166820AH, 5166820AG
- Item Weight: 9.40 Pounds
- Item Dimensions: 4.8 x 6.7 x 29.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5166820AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Shock Absorber, Rear Part Number: 52090247AJ
$86.97 MSRP: $131.00
You Save: $44.03 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber - Suspension; Rear Shock Absorber; Strut and Coil Spring Assembly Kit; Complete Strut.; Shock; Shock Absorber Suspension Rear; Shock Absorber Suspension
- Position: Rear
- Replaces: 52090247AG, 52090247AI, 52090247AH
- Item Weight: 5.70 Pounds
- Item Dimensions: 30.6 x 7.7 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52090247AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Shock Absorber Parts and Q&A

Q: How to Service and Repair a Left Front Shock Absorber on 2009 Jeep Commander?
A: Begin by mounting the clevis bracket (4) to the shock (3) and tightening it with 122 Nm (90 ft. lbs.) of force. Mount the shock assembly (3) to the vehicle and hold it by tightening the top four shock nuts (2) to 95 Nm (70 ft. lbs.). Then, fit all three PDC (1) bracket nuts and raise the vehicle. Place the lower stabilizer bolt (3) in the lower control arm and tighten it to 115 Nm (85 ft. lbs.). After that, position and tighten the lower clevis bolt (2) in the lower control arm to 169 Nm (125 ft. lbs.). After that, fit the upper ball joint into the knuckle (1) and turn the nut until you reach 75 Nm (55 ft. lbs.) of torque. Once done, put in the disc brake rotor and tighten the caliper adaptor mounting bolts with a torque of 176 Nm (130 ft. lbs.). Once you have the spacer, install the tire and wheel assembly before letting the vehicle down.