Other Name: Arm - Upper Control; Control Arm; Arm Upper Control Rear
Position: Upper
Replaces: 68005174AA, 68005174AB
Item Weight: 4.00 Pounds
Item Dimensions: 18.7 x 3.3 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68005174AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2009 Jeep Commander Control Arm Parts and Q&A
Q: How to Service and Repair the Right Side Control Arm on 2009 Jeep Commander?
A: All torques for service and repair on the right side control arm should be applied with the vehicle fully resting on the ground. Put the lower suspension arm (9) into place in the frame rail, attach the frame rail bracket bolt (8) and nut (1) and tighten everything to 176 Nm (130 ft. lbs.). After that, slide the lower suspension arm into its axle bracket and bolt the axle bracket with the bolt and nut, using 210 Nm (155 ft. lbs.) of torque. Lastly, undo all the supports and bring the vehicle down to the ground.