How Is the Blower Motor Resistor Installed on 2009 Jeep Liberty?

Installation In order to install the blower motor resistor, install the resistor in the HVAC housing and fasten it with two screws, which are tightened to 1.2 Nm (10 in. lbs.). At that point, attach the harness of the wire, to the resistor, and seal the glove box, reconnecting the negative battery cable again.

OEM 2009 Jeep Liberty Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
2009 Jeep Liberty Control Module, Front Part Number: 68317103AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Power; HVAC Blower Motor Control Module; Front Control Module; Blower Motor Regulator; Module; Resistor
- Position: Front
- Replaces: 5143824AA, 5061587AA, 5179985AA, 4596304AC, 4596304AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.2 x 5.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68317103AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Liberty Submodels:
- Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
2009 Jeep Liberty Resistor Part Number: 68003998AA
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; HVAC Blower Motor Regulator; Resistor Blower Motor; Blower Motor Resistor
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 3.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003998AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Liberty Submodels:
- Limited, Sport | 6 Cyl 3.7 L GAS

2009 Jeep Liberty Blower Motor Resistor Parts and Q&A

Q: How Is the Blower Motor Resistor Installed on 2009 Jeep Liberty?
A: Installation In order to install the blower motor resistor, install the resistor in the HVAC housing and fasten it with two screws, which are tightened to 1.2 Nm (10 in. lbs.). At that point, attach the harness of the wire, to the resistor, and seal the glove box, reconnecting the negative battery cable again.