How to Install a MAP Sensor on 2009 Jeep Liberty?

Installation of Manifold Pressure/Vacuum Sensor requires cleaning the mounting hole and examining the o-ring seal to confirm that it is not damaged. Move the locating pin by sliding the sensor on and then install the mounting bolt and tighten it with 3 Nm (25 in. lbs.). Lastly, make a connection of the electrical connector.

OEM 2009 Jeep Liberty MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2009 Jeep Liberty M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS

2009 Jeep Liberty MAP Sensor Parts and Q&A

Q: How to Install a MAP Sensor on 2009 Jeep Liberty?
A: Installation of Manifold Pressure/Vacuum Sensor requires cleaning the mounting hole and examining the o-ring seal to confirm that it is not damaged. Move the locating pin by sliding the sensor on and then install the mounting bolt and tighten it with 3 Nm (25 in. lbs.). Lastly, make a connection of the electrical connector.