How to Install the MAP Sensor on a 3.7L Engine on 2008 Jeep Liberty?

Before putting on the Manifold Pressure/Vacuum Sensor, clean the area of the MAP sensor hole found on the intake manifold inspection cover. In addition, carefully review the MAP sensor's o-ring for any rips or slices. Place the MAP sensor into the manifold so that its locating pin fits into the pinhole. Bolt the assembly to the frame using the included mounting bolt and tighten it to about 3 Nm (25 in. lbs.). At the end, plug the electrical connector into place.

OEM 2008 Jeep Liberty MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2008 Jeep Liberty M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS

2008 Jeep Liberty MAP Sensor Parts and Q&A

Q: How to Install the MAP Sensor on a 3.7L Engine on 2008 Jeep Liberty?
A: Before putting on the Manifold Pressure/Vacuum Sensor, clean the area of the MAP sensor hole found on the intake manifold inspection cover. In addition, carefully review the MAP sensor's o-ring for any rips or slices. Place the MAP sensor into the manifold so that its locating pin fits into the pinhole. Bolt the assembly to the frame using the included mounting bolt and tighten it to about 3 Nm (25 in. lbs.). At the end, plug the electrical connector into place.