How to Install a Yaw Sensor on 2009 Jeep Patriot?

To install the yaw sensor, connect the wiring harness, position over the floor pan studs, and fix with two nuts which are tightened with 9 Nm. Reposition the carpeting, install the shifter housing, reconnect the battery negative cable and carry out the Verification Test to clear faults.

OEM 2009 Jeep Patriot Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Yaw Sensors found

View related parts
2009 Jeep Patriot Yaw Rate Sensor Part Number: 56029482AA
Product Specifications
- Other Name: Module - Dynamics; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.1 x 4.1 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029482AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Patriot Submodels:
- Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Jeep Patriot Yaw Rate Sensor Part Number: 56029429AA
Product Specifications
- Other Name: Sensor - Dynamics; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Item Weight: 1.40 Pounds
- Item Dimensions: 6.5 x 6.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029429AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Patriot Submodels:
- Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Jeep Patriot Yaw Sensor Parts and Q&A

Q: How to Install a Yaw Sensor on 2009 Jeep Patriot?
A: To install the yaw sensor, connect the wiring harness, position over the floor pan studs, and fix with two nuts which are tightened with 9 Nm. Reposition the carpeting, install the shifter housing, reconnect the battery negative cable and carry out the Verification Test to clear faults.