How to Service and Repair the Drag Link on 2009 Jeep Wrangler?

First, slide the drag link socket over the adjuster and tighten the adjustment sleeve bolt just enough so it does not move. Only tighten the bolts once the toe of your shoe is hiding against the edge of the bed. Then, connect the drag link to the knuckle and tighten the nut at 85 Nm (63 ft. lbs.) and after that, install the tie rod end to the knuckle and tighten it to the exact same specification of 85 Nm (63 ft. lbs.). Once that's done, fit the right side tire, lower the vehicle and adjust the toe.

OEM 2009 Jeep Wrangler Drag Link

Center Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Drag Links found

View related parts
2009 Jeep Wrangler Drag Link, Inner Part Number: 52060048AD
$169.48 MSRP: $256.00
You Save: $86.52 (34%)
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Drag Link Inner; Drag Link Repair Kit; Steering Drag Link; Center Link; Link Rod; Socket Drag Link Inner
- Position: Inner
- Item Weight: 10.40 Pounds
- Item Dimensions: 39.1 x 6.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52060048AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X, X-S | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2009 Jeep Wrangler Center Link Part Number: 52060052AG
Product Specifications
- Other Name: Tie Rod; Drag Link Repair Kit; Steering Tie Rod End; Drag Link; Socket Tie Rod Outer Includes Bar And Brackets; Socket Tie Rod Outer
- Replaces: 52060052AE, 52060052AF
- Item Weight: 30.20 Pounds
- Item Dimensions: 63.0 x 10.6 x 29.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52060052AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X, X-S | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2009 Jeep Wrangler Drag Link Parts and Q&A

Q: How to Service and Repair the Drag Link on 2009 Jeep Wrangler?
A: First, slide the drag link socket over the adjuster and tighten the adjustment sleeve bolt just enough so it does not move. Only tighten the bolts once the toe of your shoe is hiding against the edge of the bed. Then, connect the drag link to the knuckle and tighten the nut at 85 Nm (63 ft. lbs.) and after that, install the tie rod end to the knuckle and tighten it to the exact same specification of 85 Nm (63 ft. lbs.). Once that's done, fit the right side tire, lower the vehicle and adjust the toe.