How to Service and Repair a Power Steering Pump on a 3.8L Engine on 2009 Jeep Wrangler?

To work on the power steering pump on a 3.8L car, first get rid of as much fluid as you can by taking off the cap from the power steering reservoir and draining it. After that, take away the air box assembly and unhook the pressure hose and supply hose from the pump. Remove the drive belt, then take out the three front mounting bolts that run round the pulley. After that, unfasten the pump from the pulley. If you have to install a new pulley, first read the instructions for removing the current power steering pump pulley.

OEM 2009 Jeep Wrangler Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pump found

View related parts
2009 Jeep Wrangler Power Steering Pump Part Number: 52059899AE
$130.74 MSRP: $190.00
You Save: $59.26 (32%)
Product Specifications
- Other Name: Pump - Power Steering With Pulley; Steering Pump, Mech; Pump Assembly Power Steering With Pulley
- Replaces: 52059899AD
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.5 x 9.6 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059899AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS

2009 Jeep Wrangler Power Steering Pump Parts and Q&A

Q: How to Service and Repair a Power Steering Pump on a 3.8L Engine on 2009 Jeep Wrangler?
A: To work on the power steering pump on a 3.8L car, first get rid of as much fluid as you can by taking off the cap from the power steering reservoir and draining it. After that, take away the air box assembly and unhook the pressure hose and supply hose from the pump. Remove the drive belt, then take out the three front mounting bolts that run round the pulley. After that, unfasten the pump from the pulley. If you have to install a new pulley, first read the instructions for removing the current power steering pump pulley.