How to Service and Repair a Fuel Level Sensor on 2009 Jeep Wrangler?

Before you service or repair the fuel level sensor, you need to remove the fuel pump module. Make sure to unplug the electrical connector from the fuel level sensor and remember not to handle the terminals or the resistor card, also do not pull on the unit using the wires. Push the sensor snap tab to the left with your finger at the same time as slowly lifting the bottom of the unit. Cover your body and eyes because you can get hurt by spilling fuel and since the fuel system stays under high pressure even when the engine is turned off, you should release all the fuel pressure before accessing it. Make sure you open windows or use fans for ventilation and don't smoke, work with flames or use sparks when you are performing the service to avoid any serious or fatal injury.

OEM 2009 Jeep Wrangler Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Level Sensors found

View related parts
2009 Jeep Wrangler Module - Fuel Pump/Level Unit Part Number: 68003339AG
$405.33 MSRP: $590.00
You Save: $184.67 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: MODULE-FUEL PUMP/LEVEL UNIT
- SKU: 68003339AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Jeep Wrangler Submodels:
- Rubicon, Sahara, Unlimited Rubicon, Unlimited Sahara, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2009 Jeep Wrangler Fuel Pump Gasket Part Number: 68304753AA
$32.23 MSRP: $47.75
You Save: $15.52 (33%)
ADD TO CART
Product Specifications
- Other Name: O Ring - Fuel Pump And Level Unit; Fuel Pump Tank Seal; Fuel Pump Seal; Fuel Pump Assembly Seal; Gasket Fuel Pump
- Replaces: 57009306AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.2 x 6.3 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68304753AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X | 2.0L L4, 2.4L L4, 3.0L V6, 3.6L V6, 3.8L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L GAS, 4.0L L6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 6.4 L GAS
View related parts
2009 Jeep Wrangler Fuel Gauge Sending Unit Part Number: 68003385AA
$139.36 MSRP: $207.00
You Save: $67.64 (33%)
Product Specifications
- Other Name: Module - Level Unit; Fuel Sender and Hanger Assembly; Fuel Pump Module Assembly; Fuel Level Sensor; Level Indicator; Module Kit Level Unit
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.4 x 8.2 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003385AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2009 Jeep Wrangler Fuel Level Sensor Parts and Q&A

Q: How to Service and Repair a Fuel Level Sensor on 2009 Jeep Wrangler?
A: Before you service or repair the fuel level sensor, you need to remove the fuel pump module. Make sure to unplug the electrical connector from the fuel level sensor and remember not to handle the terminals or the resistor card, also do not pull on the unit using the wires. Push the sensor snap tab to the left with your finger at the same time as slowly lifting the bottom of the unit. Cover your body and eyes because you can get hurt by spilling fuel and since the fuel system stays under high pressure even when the engine is turned off, you should release all the fuel pressure before accessing it. Make sure you open windows or use fans for ventilation and don't smoke, work with flames or use sparks when you are performing the service to avoid any serious or fatal injury.