How to Install a MAP Sensor into the Upper Intake Manifold on 2008 Jeep Wrangler?

The MAP sensor is mounted at the back of the top intake manifold. Start with checking the condition of the O-ring and then clean the sensor base. To install, depress the sensor and turn clockwise 1/4 turn. Lastly, disconnect the electrical connector from the sensor.

OEM 2008 Jeep Wrangler MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2008 Jeep Wrangler M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS

2008 Jeep Wrangler MAP Sensor Parts and Q&A

Q: How to Install a MAP Sensor into the Upper Intake Manifold on 2008 Jeep Wrangler?
A: The MAP sensor is mounted at the back of the top intake manifold. Start with checking the condition of the O-ring and then clean the sensor base. To install, depress the sensor and turn clockwise 1/4 turn. Lastly, disconnect the electrical connector from the sensor.