JeepParts
My Garage
My Account
Cart
OEM 2010 Chrysler PT Cruiser A/C Hose
Air Conditioning Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 A/C Hoses found
2010 Chrysler PT Cruiser Discharge Hose Part Number: 5058274AD
$83.01 MSRP: $126.00You Save: $42.99 (35%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line; Line A/C Discharge
- Replaces: 5058274AC, 5058274AB, 5264818AC, 5058274AA, 5264818AE, 5264818AB, 5264818AD
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.5 x 6.8 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5058274AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2010 Chrysler PT Cruiser Liquid Line Part Number: 5058272AF
$60.06 MSRP: $130.00You Save: $69.94 (54%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Line - A/C Liquid; A/C Refrigerant Liquid Hose; A/C Refrigerant Hose; A/C Hose; Line A/C Liquid
- Item Weight: 1.00 Pounds
- Item Dimensions: 18.4 x 8.0 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5058272AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2010 Chrysler PT Cruiser Suction Hose Part Number: 5058273AG
Product Specifications- Other Name: Line - A/C Suction; A/C Refrigerant Suction Hose; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line
- Replaces: 5058273AE, 5058273AF
- Item Weight: 1.20 Pounds
- Item Dimensions: 30.6 x 9.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5058273AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2010 Chrysler PT Cruiser A/C Hose Parts and Q&A
- Q: How to Install an A/C Hose Suction Line on 2010 Chrysler PT Cruiser?A: Before installing the A/C suction line, make certain that the refrigerant oil level is set so that the A/C system does not fail and the compressor is protected. When changing more than one air conditioning part, go to the Refrigerant Oil Capacities chart to know how much oil to use. Replacing the O-ring seals on the refrigerant line is necessary when you open it for service to keep leaks from forming. Install the A/C suction line in the engine compartment, then take off any tape or plugs installed over the suction line fitting and accumulator tube tapping block port. Cleanly oil a rubber O-ring seal with the right refrigerant oil and fit it onto the suction line fitting. Feed the A/C suction line into the accumulator tube tapping block, fit the nut on it and tighten it to 20 Nm (180 in. lbs.). Disconnect the tape or plug from both the suction line fitting and the compressor port, slide a new rubber O-ring seal on the suction line fitting and attach the suction line to the compressor. Use the bolt to fasten the line, but make sure you tighten it to 12 Nm (108 in. lbs.). On cars with a 2.4L Turbo engine, install the retaining bracket on the thermostat housing nut with 5 Nm (44 in. lbs.) of torque. After that, put the reservoir, pump and belt back in place. Drain the refrigerant from the system, test the refrigerant oil and add refrigerant as it is needed.
Related 2010 Chrysler PT Cruiser Parts
2010 Chrysler PT Cruiser Heater Core
2010 Chrysler PT Cruiser A/C Accumulator
2010 Chrysler PT Cruiser A/C Clutch
2010 Chrysler PT Cruiser A/C Compressor
2010 Chrysler PT Cruiser A/C Compressor Cut-Out Switches
2010 Chrysler PT Cruiser A/C Condenser
2010 Chrysler PT Cruiser A/C Switch
2010 Chrysler PT Cruiser A/C System Valve Core
2010 Chrysler PT Cruiser Blend Door Actuator
2010 Chrysler PT Cruiser Blower Motor
2010 Chrysler PT Cruiser Evaporator
2010 Chrysler PT Cruiser HVAC Pressure Switch