How to Install a MAP Sensor on the Intake Manifold for 2.0 and 2.4L Engines on 2010 Dodge Avenger?

To install the manifold absolute pressure (MAP) sensor on the intake manifold for 2.0 and 2.4L engines first secure the sensor with a screw tightened to 4.5 Nm (40 in. lbs.). Then, connect the electrical connector and reconnect the negative battery cable.

OEM 2010 Dodge Avenger MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2010 Dodge Avenger M.A.P. Sensor Part Number: 5033310AB
$69.00 MSRP: $102.00
You Save: $33.00 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5149092AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033310AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
- Express, Lux, Mainstreet, R/T, SE, SXT | 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Avenger M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
- R/T, SE, SXT | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2010 Dodge Avenger MAP Sensor Parts and Q&A

Q: How to Install a MAP Sensor on the Intake Manifold for 2.0 and 2.4L Engines on 2010 Dodge Avenger?
A: To install the manifold absolute pressure (MAP) sensor on the intake manifold for 2.0 and 2.4L engines first secure the sensor with a screw tightened to 4.5 Nm (40 in. lbs.). Then, connect the electrical connector and reconnect the negative battery cable.