How to Install a Knock Sensor and What Are the Steps Involved on 2010 Dodge Avenger?

The side of the cylinder block in front of the starter, beneath the intake manifold, is where the knock sensor is bolted in place. At first, plug the electrical connector into the knock sensor. Then, fit the knock sensor and tighten the bolt to 22 Nm (195 in. lbs.), because incorrect tightening could damage the sensor and result in mismanaged spark. In the end, attach the negative battery cable.

OEM 2010 Dodge Avenger Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2010 Dodge Avenger Knock Sensor Part Number: 4606093AD
$103.54 MSRP: $157.00
You Save: $53.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Detonation; Ignition Knock (Detonation) Sensor; Sensor; Sensor Detonation
- Replaces: 4606093
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 2.7 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606093AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
- R/T, SE, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Dodge Avenger Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
- Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS

2010 Dodge Avenger Knock Sensor Parts and Q&A

Q: How to Install a Knock Sensor and What Are the Steps Involved on 2010 Dodge Avenger?
A: The side of the cylinder block in front of the starter, beneath the intake manifold, is where the knock sensor is bolted in place. At first, plug the electrical connector into the knock sensor. Then, fit the knock sensor and tighten the bolt to 22 Nm (195 in. lbs.), because incorrect tightening could damage the sensor and result in mismanaged spark. In the end, attach the negative battery cable.