How Does the Spoiler Installation Unfold on 2010 Dodge Caliber?

The first thing to do for installation is to connect the satellite wire connector. Should the seal need replacing, change it and then link the Chmsl wire. Wipe the liftgate's ends with alcohol to make them ready for the foam spacers. Peel off the plastic stickers on the spacers and put the spoiler on your vehicle. Put the center push pin through the center spot in the liftgate and then place the four spoiler nuts on the spoiler studs. Insert the spoiler plugs and then press the spoiler up above the spacers to help the tape stick to your liftgate. The last step is to install the upper liftgate molding.

OEM 2010 Dodge Caliber Spoiler

Spoiler Wing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Spoiler found

View related parts
2010 Dodge Caliber Spoiler, Rear Part Number: YQ84RXFAM
$287.99 MSRP: $366.00
You Save: $78.01 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spoiler - Liftgate; Spoiler, Rear; Spoiler Liftgate
- Position: Rear
- Replaces: YQ84RXFAG, YQ84RXFAL, YQ84RXFAJ, YQ84RXFAK, YQ84RXFAH, YQ84RXFAF, YQ84RXFAI
- Item Weight: 7.10 Pounds
- Item Dimensions: 49.4 x 11.4 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YQ84RXFAM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Spoiler Parts and Q&A

Q: How Does the Spoiler Installation Unfold on 2010 Dodge Caliber?
A: The first thing to do for installation is to connect the satellite wire connector. Should the seal need replacing, change it and then link the Chmsl wire. Wipe the liftgate's ends with alcohol to make them ready for the foam spacers. Peel off the plastic stickers on the spacers and put the spoiler on your vehicle. Put the center push pin through the center spot in the liftgate and then place the four spoiler nuts on the spoiler studs. Insert the spoiler plugs and then press the spoiler up above the spacers to help the tape stick to your liftgate. The last step is to install the upper liftgate molding.