How is the left engine mount installed on Dodge Challenger?

The left engine mount should be mounted onto the engine mounting bracket and hand tightened with the bolts. After that, use your hands to tighten the engine mount through the studs. After that, tighten the engine mount to mounting bracket bolts to the recommended value of 75 Nm (55 ft. lbs.) and remove the lifting device. After completing the bearings, mate the engine to the block and install the mount bolts through the studs to a torque of 12 Nm (106 in. lbs.). Secure the engine mount heat shield and bolts with 11 Nm of torque (97 in. lbs.). Bolt the left engine mount onto its cradle with the nuts, tighten them to 75 Nm (55 ft. lbs.). Piece the belly pan to the heart of the vehicle and connect the fasteners. After that, place the vehicle back on the ground and attach the negative battery cable.

How to Service and Repair a Front Engine Mount on Dodge Challenger?

Before servicing or repairing the front engine mount, take out the negative battery cable and lift the car. In the next step, unscrew the fastener holding the heat shield (2) and remove the heat shield (1). After that, remove the generator support bracket (1) and the engine mount nuts (1,2). Jack up the engine and then get the hydromount fasteners (1,2) unscrewed and the hydromount (3) off the engine. Should you need to, take out the left side engine mount bracket (1) and the right side engine mount bracket (1).

OEM Dodge Challenger Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

34 Engine Mounts found

View related parts
Dodge Challenger Transmission Mount Part Number: 4578062AC
$58.15 MSRP: $87.15
You Save: $29.00 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount; Automatic & Manual Transmission Mount; Engine & Transfer Case Mount; Motor Mount; Support Bracket; Transmission Mount Bracket; Transmission Support; Bracket Transmission Mount
- Replaces: 4578062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Dodge Challenger | R/T, Rallye Redline, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Transmission Mount Part Number: 68146569AB
$66.29 MSRP: $99.35
You Save: $33.06 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount; Automatic & Manual Transmission Mount; Transfer Case Mount; Transmission Mount Bracket; Bracket Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Dodge Challenger | R/T, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT Demon, SRT Hellcat, SRT Hellcat Redeye, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, T/A, T/A 392 Widebody | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Mount Bracket, Driver Side Part Number: 4855025AC
$77.50 MSRP: $117.00
You Save: $39.50 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount Left Side; Engine Mount Bracket
- Position: Driver Side
- Replaces: 4855025AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T 392, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, Scat Pack, T/A 392, T/A 392 Widebody | 6.4L V8, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Motor Mount, Passenger Side Part Number: 68277081AA
$124.65 MSRP: $188.00
You Save: $63.35 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount; Isolator; Cushion Engine Support
- Position: Passenger Side
- Replaces: 4726030AH, 4726030AG, 4726030AE, 4726030AF, 4726030AC, 4726030AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | GT, Rallye Redline, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Challenger Mount Bracket, Front Driver Side Part Number: 4578053AC
$100.40 MSRP: $152.00
You Save: $51.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount, Front Left; Motor Mount; Front Mount; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Front Driver Side
- Replaces: 4578053AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | R/T, SRT8 | 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Mount Bracket, Driver Side Part Number: 4578051AC
$104.38 MSRP: $158.00
You Save: $53.62 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount, Front Left; Motor Mount; Side Mount; Front Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Replaces: 4578051AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | SE | 6 Cyl 3.5 L GAS
View related parts
Dodge Challenger Motor Mount Part Number: 68277082AA
$119.04 MSRP: $180.00
You Save: $60.96 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount; Engine Mount Bracket; Front Mount; Mount; Isolator; Cushion Engine Support
- Replaces: 5090140AG, 5090140AD, 5090140AC, 5090140AF, 5090140AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | GT, R/T, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Shaker, SXT, SXT Plus, T/A | 5.7L V8, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Front Mount, Passenger Side Part Number: 5038766AB
$141.50 MSRP: $212.00
You Save: $70.50 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Mount; Engine Mount Right
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Motor Mount, Passenger Side Part Number: 68062142AH
$178.56 MSRP: $271.00
You Save: $92.44 (35%)
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount; Engine Mount Right
- Position: Passenger Side
- Replaces: 68062142AC, 68062142AD, 68062142AG, 68062142AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T 392, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT 392, SRT8, Scat Pack, Scat Pack 392 Widebody, T/A 392, T/A 392 Widebody | 6.4L V8, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Transmission Mount Part Number: 68271940AA
$63.39 MSRP: $94.95
You Save: $31.56 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount - Transmission; Manual Transmission Mount; Transfer Case Mount; Mount Transmission
- Replaces: 5180484AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, Scat Pack, Scat Pack 392 Widebody, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Transmission Mount Bracket Part Number: 5038752AA
$64.73 MSRP: $97.10
You Save: $32.37 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount; Automatic Transmission Mount Bracket; Transfer Case Mount; Bracket Transmission Mount; Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Dodge Challenger | SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Mount Part Number: 5180406AE
$119.48 MSRP: $247.00
You Save: $127.52 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Motor Mount; Insulator Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Challenger | R/T | 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Transmission Mount Bracket Part Number: 68170323AA
$177.88 MSRP: $263.00
You Save: $85.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Crossmember - Transmission; Automatic Transmission Mount Bracket; Transmission Crossmember; Transfer Case Mount; Trans Crossmember; Crossmember Transmission; Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023, 2015 Dodge Challenger | R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT Hellcat, T/A 392 Widebody | 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Transmission Mount Bracket Part Number: 5181958AB
$177.88 MSRP: $263.00
You Save: $85.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Crossmember - Transmission; Automatic Transmission Mount Bracket; Transmission Crossmember; Transfer Case Mount; Trans Crossmember; Crossmember Transmission; Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | R/T, R/T Plus, R/T Plus Shaker, R/T Shaker, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, T/A | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Transmission Mount Part Number: 68092519AA
$53.98 MSRP: $79.25
You Save: $25.27 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission; Automatic Transmission Mount; Transfer Case Mount; Motor Mount; Insulator; Mount Transmission
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392 | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Transmission Mount Bracket Part Number: 5180304AA
$383.58 MSRP: $560.00
You Save: $176.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Transmission; Automatic Transmission Mount Bracket; Transmission Crossmember; Transfer Case Mount; Trans Crossmember; Crossmember Transmission; Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Dodge Challenger | R/T, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Shaker, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, T/A | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Transmission Mount Part Number: 68084747AA
$42.81 MSRP: $62.85
You Save: $20.04 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission; Automatic Transmission Mount; Transfer Case Mount; Motor Mount; Insulator; Mount Transmission
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT 392, SRT Demon, SRT Hellcat, SRT Hellcat Redeye, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Super Stock, SRT8, Scat Pack, Scat Pack 392 Widebody, T/A 392, T/A 392 Widebody | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Motor Mount, Driver Side Part Number: 68062143AH
$141.53 MSRP: $188.00
You Save: $46.47 (25%)
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount, Left; Engine Mount Bracket; Front Mount; Mount; Engine Mount Left
- Position: Driver Side
- Replaces: 68062143AF, 68062143AD, 68062143AG, 68062143AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T 392, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT 392, SRT8, Scat Pack, Scat Pack 392 Widebody, T/A 392, T/A 392 Widebody | 6.4L V8, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Front Mount Part Number: 4578046AF
$121.57 MSRP: $161.00
You Save: $39.43 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T | 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Front Mount Part Number: 4578044AF
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Cushion Engine Support; Engine Mount
- Position: Front
- Replaces: 4578044AC, 4578044AD, 4578044AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | SE | 3.5L V6, 6 Cyl 3.5 L GAS

| Page 1 of 2 |Next >

1-20 of 34 Results

Dodge Challenger Engine Mount

Choose OEM Engine Mount that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Engine Mount in Dodge Challenger vehicles serves two primary functions: It insulates the noise and vibration arising from the engine's functioning and also provides a firm anchoring of the engine on the chassis. This positioning is important for the safety of the vehicles and to avoid strains which in the process deform the parts. The Engine Mounts that have been used in Dodge Challenger models include, Rubber insulated Engine Mounts, fluid filled hydraulic Engine Mounts, and the modern day active electronic Engine Mounts. Conventional types are of metallic construction with rubber pillars in between while the hydraulic ones offer more damping. Current active mounts change their damping according to the rotation speed of the engine for the optimal experience. Engine Mounts may wear out over time, cause by heat or fluids, some of the typical problems include sponginess or leakage. Periodic checkup is also important in order to validate the efficiency of the Engine Mounts in Dodge Challenger cars as squeaking or rumbling could be a suggestion that the Engine Mounts require to be replaced.

Dodge Challenger Engine Mount Parts and Q&A

Front Mount
4578046AF
Q: How is the left engine mount installed on Dodge Challenger?
A:
The left engine mount should be mounted onto the engine mounting bracket and hand tightened with the bolts. After that, use your hands to tighten the engine mount through the studs. After that, tighten the engine mount to mounting bracket bolts to the recommended value of 75 Nm (55 ft. lbs.) and remove the lifting device. After completing the bearings, mate the engine to the block and install the mount bolts through the studs to a torque of 12 Nm (106 in. lbs.). Secure the engine mount heat shield and bolts with 11 Nm of torque (97 in. lbs.). Bolt the left engine mount onto its cradle with the nuts, tighten them to 75 Nm (55 ft. lbs.). Piece the belly pan to the heart of the vehicle and connect the fasteners. After that, place the vehicle back on the ground and attach the negative Battery Cable.
Mount Bracket, Front Driver Side
4578053AC
Q: How to Service and Repair a Front Engine Mount on Dodge Challenger?
A:
Before servicing or repairing the front engine mount, take out the negative Battery Cable and lift the car. In the next step, unscrew the fastener holding the heat shield (2) and remove the heat shield (1). After that, remove the generator support bracket (1) and the engine mount nuts (1,2). Jack up the engine and then get the hydromount fasteners (1,2) unscrewed and the hydromount (3) off the engine. Should you need to, take out the left side engine mount bracket (1) and the right side engine mount bracket (1).