How to Install a Front Shock Absorber on 2010 Dodge Challenger?

Put the whole shock assembly through the front suspension, one part at a time, taking it back out in the same order. Be sure to tighten the nut enough so that the ball stud joint does not get damaged. First, push the upper ball joint stud through the hole in the top of the knuckle and tighten the nut afterwards. Firmly hold the ball joint stud with a hex wrench and have a wrench tighten the nut to 47 Nm plus 90° of it. After that, link the wheel speed sensor cable routing clip with the brake tube bracket. Put on the lower shock mounting bolt, but do not tighten it for now. Slide the stabilizer link ball joint into the back of the shock and fit and tighten a nut to join the link to the shock assembly, until it reaches a torque of 128 Nm. Subsequently, mount the tire and wheel, lower the car and install the three nuts holding the shock assembly to the shock tower, turning them up to 27 Nm. If needed, ensure the shock tower cap matches the shock mounting nuts and then snap it onto its arms.

OEM 2010 Dodge Challenger Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Shock Absorbers found

View related parts
2010 Dodge Challenger Shock Absorber Part Number: 5181350AD
$313.84 MSRP: $468.00
You Save: $154.16 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock - Suspension; Suspension Shock Absorber; Shock; Strut
- Replaces: 5181350AB, 5181350AC
- Item Weight: 9.40 Pounds
- Item Dimensions: 29.6 x 6.0 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5181350AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Shock Absorber Part Number: 5181349AD
$313.84 MSRP: $468.00
You Save: $154.16 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock - Suspension; Suspension Shock Absorber; Shock; Strut
- Replaces: 5181349AB, 5181349AC
- Item Weight: 8.90 Pounds
- Item Dimensions: 29.0 x 6.0 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5181349AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Shock Absorber, Rear Part Number: 5039355AG
$318.24 MSRP: $486.00
You Save: $167.76 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Shock Absorber Kit Suspension Rear
- Position: Rear
- Replaces: 5039355AD, 5039355AE
- Item Weight: 7.30 Pounds
- Item Dimensions: 29.0 x 6.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5039355AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Strut Part Number: 5180742AA
$134.83 MSRP: $200.00
You Save: $65.17 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock - Suspension; Strut & Shock Kit; Coil Spring; ABS Set; Complete Strut; Shock Absorber.; Shock Absorber Kit Suspension [Sdc]; Shock Absorber Kit Suspension; Shock Absorber Suspension; Shock
- Item Weight: 10.00 Pounds
- Item Dimensions: 29.3 x 6.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5180742AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
2010 Dodge Challenger Strut Part Number: 5180743AA
Product Specifications
- Other Name: Shock - Suspension; Strut & Shock Kit; Coil Spring; ABS Set; Complete Strut; Shock Absorber.; Shock Absorber Kit Suspension [Sdc]; Shock Absorber Kit Suspension; Shock Absorber Suspension; Shock
- Item Weight: 9.10 Pounds
- Item Dimensions: 28.7 x 6.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5180743AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS

2010 Dodge Challenger Shock Absorber Parts and Q&A

Q: How to Install a Front Shock Absorber on 2010 Dodge Challenger?
A: Put the whole shock assembly through the front suspension, one part at a time, taking it back out in the same order. Be sure to tighten the nut enough so that the ball stud joint does not get damaged. First, push the upper ball joint stud through the hole in the top of the knuckle and tighten the nut afterwards. Firmly hold the ball joint stud with a hex wrench and have a wrench tighten the nut to 47 Nm plus 90° of it. After that, link the wheel speed sensor cable routing clip with the brake tube bracket. Put on the lower shock mounting bolt, but do not tighten it for now. Slide the stabilizer link ball joint into the back of the shock and fit and tighten a nut to join the link to the shock assembly, until it reaches a torque of 128 Nm. Subsequently, mount the tire and wheel, lower the car and install the three nuts holding the shock assembly to the shock tower, turning them up to 27 Nm. If needed, ensure the shock tower cap matches the shock mounting nuts and then snap it onto its arms.