How to remove a Sway Bar Kit on 2010 Dodge Challenger?

Before removing the front sway bar kit, make sure the vehicle is high and supported. After that, take out the belly pan. Open up the clips holding the heat shields near the vehicle's sway bar kit and unplug any cables from the heat shields. Fasteners in the form of bolts secure the sway bar kit isolator retainer, so remove these bolts from both sides. After that, remove the retainer halves from the sway bar kit isolator. Take out each isolator from the sway bar kit by running the slit along the jaws. At the ends of the vehicle, unbolt the nut holding the sway bar link to the kit, slide the link ball joint free from the kit, and lift the kit out of the body.

OEM 2010 Dodge Challenger Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Sway Bar Kits found

View related parts
2010 Dodge Challenger Stabilizer Bar, Front Part Number: 68235661AC
$295.71 MSRP: $441.00
You Save: $145.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 68235661AB, 68235661AA
- Item Weight: 20.30 Pounds
- Item Dimensions: 48.5 x 11.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68235661AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Shaker, T/A | 8 Cyl 5.7 L GAS
View related parts
2010 Dodge Challenger Stabilizer Bar, Rear Part Number: 4782873AB
$104.21 MSRP: $154.00
You Save: $49.79 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension; Bar Rear Sway
- Position: Rear
- Item Weight: 6.20 Pounds
- Item Dimensions: 49.0 x 8.6 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782873AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, R/T Classic, Rallye Redline, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Stabilizer Bar, Front Part Number: 4782544AC
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 4782544AB
- Item Weight: 15.60 Pounds
- Item Dimensions: 39.7 x 10.3 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782544AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, R/T Classic, Rallye Redline, SE, SRT8, SXT, SXT Plus | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Stabilizer Bar, Rear Part Number: 4782872AB
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension; Bar Rear Sway
- Position: Rear
- Item Weight: 5.80 Pounds
- Item Dimensions: 55.9 x 10.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782872AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Stabilizer Bar, Rear Part Number: 68184227AA
$147.29 MSRP: $219.00
You Save: $71.71 (33%)
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Item Weight: 6.20 Pounds
- Item Dimensions: 69.4 x 7.6 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68184227AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, Scat Pack 392 Widebody, T/A, T/A 392, T/A 392 Widebody | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Stabilizer Bar, Front Part Number: 4782543AC
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 4782543AB
- Item Weight: 13.00 Pounds
- Item Dimensions: 39.5 x 11.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782543AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, R/T Classic, Rallye Redline, SE, SRT8, SXT, SXT Plus | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS

2010 Dodge Challenger Sway Bar Kit Parts and Q&A

Q: How to remove a Sway Bar Kit on 2010 Dodge Challenger?
A: Before removing the front sway bar kit, make sure the vehicle is high and supported. After that, take out the belly pan. Open up the clips holding the heat shields near the vehicle's sway bar kit and unplug any cables from the heat shields. Fasteners in the form of bolts secure the sway bar kit isolator retainer, so remove these bolts from both sides. After that, remove the retainer halves from the sway bar kit isolator. Take out each isolator from the sway bar kit by running the slit along the jaws. At the ends of the vehicle, unbolt the nut holding the sway bar link to the kit, slide the link ball joint free from the kit, and lift the kit out of the body.