Other Name: Actuator - A/C And Heater; HVAC Floor Mode Door Actuator; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; Actuator; Actuator A/C And Heater
Replaces: 68033337AA, 68238243AA
Item Weight: 0.70 Pounds
Item Dimensions: 2.9 x 2.9 x 3.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68299450AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
Other Name: Door - Temperature; HVAC Mode Door; Door; Door Temperature Also Used Assembly The Blend Door; Door Temperature
Replaces: 5183151AA
Item Weight: 0.60 Pounds
Item Dimensions: 6.7 x 3.9 x 1.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5183151AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
American Value Package, Base, C/V, Crew, Express, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
2010 Dodge Grand Caravan Blend Door Actuator Parts and Q&A
Q: How to Service and Repair a Blend Door Actuator Safely on 2010 Dodge Grand Caravan?
A: Before servicing or repairing the Air Door Actuator/Motor, make sure to disconnect the negative battery cable, wait two minutes and then turn the air bag system off to keep the air bags from accidentally deploying. The first thing to do is to remove the negative battery cable. If your vehicle is so equipped, take out the silencer from the passenger side of the instrument panel. After that, remove the lower glove box bin from the instrument panel and take out the lower trim panel to open the mode door actuator. Unhook the screws holding the mode door actuator to the bracket beneath the passenger side HVAC housing and take the actuator out. After that, pull the red tab free, disconnect the wire harness from the actuator by the connector and take the actuator out of the vehicle.