How is the Canister Purge Valve Installed and Where is it Located on 2010 Jeep Wrangler?

You'll find the canister purge valve close to the battery. Attach the quick-connect parts onto the valve and then tighten the wire connectors. Fit the valve group onto the tongue-type support, carefully checking that the vapor/vacuum hoses are fixed. It is also important to inspect the hoses going from the ESIM switch and filter and check for any breaks or leaks, as these could cause a Diagnostic Trouble Code (DTC).

OEM 2010 Jeep Wrangler Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2010 Jeep Wrangler Purge Valve Part Number: 4891731AC
$60.32 MSRP: $90.20
You Save: $29.88 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Linear Purge; Purge Solenoid; Purge Control Valve
- Replaces: 4891731AA
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.0 x 3.8 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4891731AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.6L V6, 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2010 Jeep Wrangler Canister Purge Valve Parts and Q&A

Q: How is the Canister Purge Valve Installed and Where is it Located on 2010 Jeep Wrangler?
A: You'll find the canister purge valve close to the battery. Attach the quick-connect parts onto the valve and then tighten the wire connectors. Fit the valve group onto the tongue-type support, carefully checking that the vapor/vacuum hoses are fixed. It is also important to inspect the hoses going from the ESIM switch and filter and check for any breaks or leaks, as these could cause a Diagnostic Trouble Code (DTC).