How is the Canister Purge Valve Installed and Where is it Located on 2009 Jeep Wrangler?

The vehicle's EVAP canister purge valve is found close to the battery. You should install the quick-connect fitting into the valve and attach the electrical connector after that. Place the valve assembly on the tongue-type bracket, making certain all vapor and vacuum hoses are fixed. Make sure to look at the vapor/vacuum lines at the ESIM switch and filter, because a leak could set off a Diagnostic Trouble Code (DTC).

OEM 2009 Jeep Wrangler Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2009 Jeep Wrangler Purge Valve Part Number: 4891731AC
$60.32 MSRP: $90.20
You Save: $29.88 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Linear Purge; Purge Solenoid; Purge Control Valve
- Replaces: 4891731AA
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.0 x 3.8 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4891731AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.6L V6, 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2009 Jeep Wrangler Canister Purge Valve Parts and Q&A

Q: How is the Canister Purge Valve Installed and Where is it Located on 2009 Jeep Wrangler?
A: The vehicle's EVAP canister purge valve is found close to the battery. You should install the quick-connect fitting into the valve and attach the electrical connector after that. Place the valve assembly on the tongue-type bracket, making certain all vapor and vacuum hoses are fixed. Make sure to look at the vapor/vacuum lines at the ESIM switch and filter, because a leak could set off a Diagnostic Trouble Code (DTC).