How to Safely Detach a Fuel Injector from the Fuel Rail on 2010 Jeep Wrangler?

You must first take off the fuel rail to get to the fuel injectors. Take out the injector wiring connector from every injector. Pivot injector 2 and pull it clear of the fuel rail, guaranteeing its clip doesn't pop off. If the injector O-ring looks damaged, then it needs to be changed. When you're planning to reuse an injector, keep the tip covered with a protective cap and change any damaged injector clips. Go on to complete the same process for all the other injectors.

OEM 2010 Jeep Wrangler Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Injector found

View related parts
2010 Jeep Wrangler Injector Part Number: 4861667AA
$139.25 MSRP: $207.00
You Save: $67.75 (33%)
ADD TO CART
Product Specifications
- Other Name: Injector - Fuel; Gasoline Injector; Fuel Injector; Injector Fuel
- Replaces: RL861667AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4861667AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS

2010 Jeep Wrangler Fuel Injector Parts and Q&A

Q: How to Safely Detach a Fuel Injector from the Fuel Rail on 2010 Jeep Wrangler?
A: You must first take off the fuel rail to get to the fuel injectors. Take out the injector wiring connector from every injector. Pivot injector 2 and pull it clear of the fuel rail, guaranteeing its clip doesn't pop off. If the injector O-ring looks damaged, then it needs to be changed. When you're planning to reuse an injector, keep the tip covered with a protective cap and change any damaged injector clips. Go on to complete the same process for all the other injectors.