How to Access and Remove a Fuel Injector from the Fuel Rail on 2009 Jeep Wrangler?

Fuel injectors can only be accessed once the fuel rail is removed. Remove the injector wiring connector from the end of each injector first. After rotating injector 2 as described, carefully pull it out of the fuel rail, while the clip stays on the injector. If the injector O-ring has damage, you will need to change it. A cap should be put onto the tip of a reused injector and any broken injector clips need to be exchanged before using the injector again. Go through these steps for all other injectors as well.

OEM 2009 Jeep Wrangler Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Injector found

View related parts
2009 Jeep Wrangler Injector Part Number: 4861667AA
$139.25 MSRP: $207.00
You Save: $67.75 (33%)
ADD TO CART
Product Specifications
- Other Name: Injector - Fuel; Gasoline Injector; Fuel Injector; Injector Fuel
- Replaces: RL861667AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4861667AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS

2009 Jeep Wrangler Fuel Injector Parts and Q&A

Q: How to Access and Remove a Fuel Injector from the Fuel Rail on 2009 Jeep Wrangler?
A: Fuel injectors can only be accessed once the fuel rail is removed. Remove the injector wiring connector from the end of each injector first. After rotating injector 2 as described, carefully pull it out of the fuel rail, while the clip stays on the injector. If the injector O-ring has damage, you will need to change it. A cap should be put onto the tip of a reused injector and any broken injector clips need to be exchanged before using the injector again. Go through these steps for all other injectors as well.