How to Install a Power Steering Pump on a 3.8L Engine on 2010 Jeep Wrangler?

Place the pulley on the pump and install it if it was taken off before beginning. After that, place the pump onto the engine where it belongs and bolt it down by hand, checking that it is tightened to 26 Nm or 19 ft. lbs. Attach the pump's pressure line first and with a torque of 31 Nm (23 ft. lbs.), join the supply hose afterward. After that, place the drive belt on the motor. Fill and top up the power steering system and then examine for any leaks. Lastly, put the air box back in position.

OEM 2010 Jeep Wrangler Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pump found

View related parts
2010 Jeep Wrangler Power Steering Pump Part Number: 52059899AE
$130.74 MSRP: $190.00
You Save: $59.26 (32%)
Product Specifications
- Other Name: Pump - Power Steering With Pulley; Steering Pump, Mech; Pump Assembly Power Steering With Pulley
- Replaces: 52059899AD
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.5 x 9.6 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059899AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS

2010 Jeep Wrangler Power Steering Pump Parts and Q&A

Q: How to Install a Power Steering Pump on a 3.8L Engine on 2010 Jeep Wrangler?
A: Place the pulley on the pump and install it if it was taken off before beginning. After that, place the pump onto the engine where it belongs and bolt it down by hand, checking that it is tightened to 26 Nm or 19 ft. lbs. Attach the pump's pressure line first and with a torque of 31 Nm (23 ft. lbs.), join the supply hose afterward. After that, place the drive belt on the motor. Fill and top up the power steering system and then examine for any leaks. Lastly, put the air box back in position.