How to Service and Repair a Windshield Washer Nozzle on 2010 Jeep Wrangler?

Before servicing the windshield washer spray nozzle, open, support and unlatch the hood. Afterward, detach the hose from the barbed nipple on the front washer nozzle which is under the hood at the rear. After that, push the front washer nozzle from the bottom side, depressing the latch and moving it out of its mounting through the top section of the hood. Finally, take out the nozzle that is screwed in on top of the hood panel.

OEM 2010 Jeep Wrangler Windshield Washer Nozzle

Front Windshield Washer Nozzle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Windshield Washer Nozzle found

View related parts
2010 Jeep Wrangler Washer Nozzle, Front Part Number: 55156728AB
$31.29 MSRP: $45.80
You Save: $14.51 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle - Windshield Washer; Windshield Washer Nozzle, Front; Nozzle Windshield Washer
- Position: Front
- Replaces: 55156728AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.0 x 1.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55156728AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 65th Anniversary Edition, 70th Anniversary, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2010 Jeep Wrangler Windshield Washer Nozzle Parts and Q&A

Q: How to Service and Repair a Windshield Washer Nozzle on 2010 Jeep Wrangler?
A: Before servicing the windshield washer spray nozzle, open, support and unlatch the hood. Afterward, detach the hose from the barbed nipple on the front washer nozzle which is under the hood at the rear. After that, push the front washer nozzle from the bottom side, depressing the latch and moving it out of its mounting through the top section of the hood. Finally, take out the nozzle that is screwed in on top of the hood panel.