How to Install a Windshield Washer Nozzle on 2009 Jeep Wrangler?

Set the front washer nozzle into the mounting hole on the hood panel's exterior. Place the anti-rotation tab of the nozzle into the anti-rotation notch found in the mounting hole. Pressing down evenly and firmly on the nozzle once again is needed until the underside of the hood panel's integral latch locks it in place. Hook the hose connector from the washer to the barbed nipple of the washer nozzle at the base of the hood and then close and buckle the hood.

OEM 2009 Jeep Wrangler Windshield Washer Nozzle

Front Windshield Washer Nozzle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Windshield Washer Nozzle found

View related parts
2009 Jeep Wrangler Washer Nozzle, Front Part Number: 55156728AB
$31.29 MSRP: $45.80
You Save: $14.51 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle - Windshield Washer; Windshield Washer Nozzle, Front; Nozzle Windshield Washer
- Position: Front
- Replaces: 55156728AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.0 x 1.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55156728AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 65th Anniversary Edition, 70th Anniversary, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 2.4L L4, 2.5L L4, 3.8L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2009 Jeep Wrangler Windshield Washer Nozzle Parts and Q&A

Q: How to Install a Windshield Washer Nozzle on 2009 Jeep Wrangler?
A: Set the front washer nozzle into the mounting hole on the hood panel's exterior. Place the anti-rotation tab of the nozzle into the anti-rotation notch found in the mounting hole. Pressing down evenly and firmly on the nozzle once again is needed until the underside of the hood panel's integral latch locks it in place. Hook the hose connector from the washer to the barbed nipple of the washer nozzle at the base of the hood and then close and buckle the hood.