You should carry out a battery reconnection procedure before working on or repairing the antenna cable if the battery has been unplugged. You should begin by taking out the negative
Battery Cable. After that, pull off the right side cowl trim panel, next the right front and rear door scuff plates and finally the right C-pillar panel. Unplug the feed from the instrument panel and from the antenna module and then pull aside the floor carpet to reach the antenna cable. The new cable should be placed and attached to the wire harness, after which you connect it to the antenna module and the instrument panel antenna cable. Put on the right side C-pillar trim panel, the right front and rear door scuff plates and the right side cowl trim panel, before reconnecting the battery negative cable.