How to Maintain Your Front Seat Belt on Chrysler 300?

Start the service of the front seat belt by first separating and blocking the battery negative cable. You should wait for two minutes after this to avoid any chance of an accidental air bag deployment. Take out the trim cover on the seat cushion, then lift the seat belt lower anchor nut off the frame. Remove the upper turning loop trim cover, the upper turning loop bolt and then pull out the lower B-pillar trim after that. Take out the tensioner squib connector and unscrew the front seat belt web guide. Between the upper retractor indexing tabs in the B-pillar, remove the screw and remove the bolt that keeps the front seat belt retractor in place. With the retractor inward, release the indexing tabs that are attached to the B-pillar. To install, set the retractor in the B-pillar so its indexing tabs are lined up and then bolt it securely. Place the upper retractor tabs against the screw, connect the following two short connectors and bolt the front seat belt web guide. Bolt the upper turning loop retainer, secure everything with 40 N.m and install the associated trim panels. Secure the seat belt to the buckle stud on the cushion frame and put the lower anchor nut into place, adjusting it to 37 N.m. Once that is done, connect the trim cover back to the seat cushion's outboard trim corner. Do not hook up the battery negative cable until the system test has been carried out to help save your life or prevent injury.

How to Properly Install Seat Belts in Sedans and Wagons on Chrysler 300?

Place the retractor in the B-pillar at the right place and secure it with the butt end of the indexing tabs as indicated. After that, tighten the threaded end of the retractor retaining bolt to 32 Nm. Following that, fit the screw between the retractor tabs on the B-pillar, connect the tensioner squib wire and screw the front seat belt web guide in place, torqued to 3 Nm. Locate the upper turning loop and tighten the retaining bolt to 40 Nm, then stand the upper turning loop trim cover on top and push in the lower B-pillar trim. Clip the seat belt onto the seat cushion stud and secure the lower anchor nut, torqued to 37 Nm and lastly fit the trim cover to the outboard part of the seat cushion. The rear seat belt installation in a sedan involves sliding the indexing tab up on the back part of the C-pillar, securing the upper turning loop retaining bolt and torquing it to 40 Nm and attaching the lower seat anchor bolt to the C-pillar, torqued to 32 Nm. Instead of placing the rear seat belt retractor right, place it so that the indexing tab is in its slot and afterward lock with a 34 Nm nut. After that, mount the quarter trim panel and the lower seat belt anchor bolt, applying both a 32 Nm torque. With the rear center retractor in place, soften the retaining nut with a 6mm hexagon key at 34 Nm, then fit the rear seat trim, soften the lower anchor nut with a 6mm hexagon key at 34 Nm and set the rear seat cushion. Place the rear center retractor at the center back, put the bolt holding the retractor in place, torch it to 34 Nm and then install the left seat back cover.

OEM Chrysler 300 Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

72 Seat Belts found

View related parts
Chrysler 300 Buckle End, White, Rear Part Number: 1HZ141C5AE
$69.74 MSRP: $103.00
You Save: $33.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Buckle Assembly - Seat Belt; Seat Belt Receptacle, Rear; Latch; Buckle Assembly - Seat Belt for Right Passenger and Center Passenger.
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chrysler 300 | C, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Center Buckle Extension, Front Part Number: 5135197AA
$70.02 MSRP: $103.00
You Save: $32.98 (33%)
ADD TO CART
Product Specifications
- Other Name: Extender - Seat Belt; Seat Belt Extension, Front; Upper Cover Extension; Extension; Extender Seat Belt Front; Extender Seat Belt
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler 300 | Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Buckle End, Gray, Front Inner Driver Side Part Number: 1BX251DVAB
$87.69 MSRP: $130.00
You Save: $42.31 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Front Inner; Seat Belt Receptacle, Front Left, Front Right; Latch; Seat Belt Front Inner
- Position: Front Inner Driver Side
- Replaces: 1BX251DVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler 300 | Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Buckle End, Dark Gray, Rear Inner Part Number: 1BY491DVAB
$87.75 MSRP: $130.00
You Save: $42.25 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Rear Inner; Seat Belt Receptacle, Rear; Latch; Seat Belt Rear Inner
- Position: Rear Inner
- Replaces: 1BY491DVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler 300 | Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Lap & Shoulder Belt, Black, Rear Outer Part Number: 5UZ23DX9AC
$140.49 MSRP: $208.00
You Save: $67.51 (33%)
ADD TO CART
Product Specifications
- Other Name: Belt Assembly - Retractor; Seat Belt Lap and Shoulder Belt, Rear Outer; Outer Belt Assembly; Seat Belt Retractor Includes Upper Mounting Bolt; Seat Belt Retractor
- Position: Rear Outer
- Replaces: 5UZ23DX9AA, 5UZ23DX9AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chrysler 300 | C, C Platinum, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Buckle End, Black, Front Driver Side Part Number: 6MS011X9AA
$215.27 MSRP: $317.00
You Save: $101.73 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Buckle Assembly - Seat Belt; Seat Belt Receptacle, Front Left; Latch; Buckle Assembly Buckle Assembly - Seat Belt Includes Mounting Bolt; Buckle Assembly Buckle Assembly - Seat Belt
- Position: Front Driver Side
- Replaces: 6MS01DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chrysler 300 | C, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Buckle End, Black, Front Passenger Side Part Number: 6MS001X9AA
$226.60 MSRP: $334.00
You Save: $107.40 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Buckle Assembly - Seat Belt; Seat Belt Receptacle, Front Right; Latch; Buckle Assembly Buckle Assembly - Seat Belt Includes Mounting Bolt; Buckle Assembly Buckle Assembly - Seat Belt
- Position: Front Passenger Side
- Replaces: 6MS00DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chrysler 300 | C, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Lap & Shoulder Belt, Beige, Rear Outer Part Number: 1HU13HL1AD
$228.87 MSRP: $337.00
You Save: $108.13 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Retractor; Seat Belt Lap and Shoulder Belt, Rear Outer; Outer Belt Assembly; Seat Belt Retractor
- Position: Rear Outer
- Replaces: 1HU13HL1AB, 1HU13HL1AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Buckle End, Black, Front Inner Passenger Side Part Number: 1HZ101X9AF
$337.63 MSRP: $498.00
You Save: $160.37 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Front Inner; Seat Belt Receptacle, Front Right; Latch; Seat Belt Front Inner
- Position: Front Inner Passenger Side
- Replaces: 1HZ101X8AE, 1HZ101X9AE, 1HZ10DX9AD, 1HZ10DX9AB, 1HZ10DX9AE, 1HZ101RRAC, 1HZ101X9AD, 1HZ10DX9AC, 1HZ10DX9AA, 1HZ101X8AD, 1HZ101X9AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Buckle End, Beige, Front Inner Passenger Side Part Number: 1HZ101L1AF
$337.63 MSRP: $498.00
You Save: $160.37 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Front Inner; Seat Belt Receptacle, Front Right; Latch
- Position: Front Inner Passenger Side
- Replaces: 1HZ101L1AC, 1HZ101L1AE, 1HZ101L1AD, 1HZ10HL1AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Buckle End, Beige, Front Inner Driver Side Part Number: 1HZ171L1AF
$352.66 MSRP: $514.00
You Save: $161.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Front Inner; Seat Belt Receptacle, Front Left; Latch
- Position: Front Inner Driver Side
- Replaces: 1HZ17HLLAB, 1HZ171L1AE, 1HZ17HL1AB, 1HZ171L1AD, 1HZ17HL1AE, 1HZ171L1AC, 1HZ17HL1AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Lap & Shoulder Belt, Light Gray, Front Outer Driver Side Part Number: UX531D1AG
$354.95 MSRP: $518.00
You Save: $163.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Left; Retractor Assembly; Seat Belt Front Outer
- Position: Front Outer Driver Side
- Replaces: UX53BD1AF, UX531D1AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Buckle End, Black, Front Inner Driver Side Part Number: 1HZ171X9AF
$360.68 MSRP: $526.00
You Save: $165.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Front Inner; Seat Belt Receptacle, Front Left; Latch; Seat Belt Front Inner
- Position: Front Inner Driver Side
- Replaces: 1HZ172X9AD, 1HZ171X9AD, 1HZ17DX9AE, 1HZ17DX9AB, 1HZ17DX9AF, 1HZ171X9AE, 1HZ17DX9AD, 1HZ171X9AC, 1HZ17DX9AC, 1HZ171RRAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Lap & Shoulder Belt, Light Gray, Front Outer Passenger Side Part Number: 1EU001D1AC
$381.29 MSRP: $555.00
You Save: $173.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Seat Belt Front Outer
- Position: Front Outer Passenger Side
- Replaces: 1EU001D1AB, 1EU00BD1AB, 1EU001D1AA, 1EU00BD1AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Lap & Shoulder Belt, Gray, Front Outer Passenger Side Part Number: 1EU002DVAC
$389.30 MSRP: $568.00
You Save: $178.70 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Seat Belt Front Outer
- Position: Front Outer Passenger Side
- Replaces: 1EU002DVAB, 1EU002DVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler 300 | C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Extension, Center Part Number: 5083695AA
$70.02 MSRP: $103.00
You Save: $32.98 (33%)
ADD TO CART
Product Specifications
- Other Name: Extender - Seat Belt; Seat Belt Extension, Center, Front, Rear; Extender Seat Belt Center And Left Seat; Extender Seat Belt Rear; Extender Seat Belt
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Buckle End, Light Gray, Rear Inner Part Number: UX561D1AC
$13.02 MSRP: $41.25
You Save: $28.23 (69%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Rear Inner; Seat Belt Receptacle, Rear; Latch; Seat Belt Rear Inner
- Position: Rear Inner
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Buckle End, Dark Gray, Rear Inner Part Number: UX561DVAC
$23.37 MSRP: $42.35
You Save: $18.98 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Rear Inner; Seat Belt Receptacle, Rear; Latch; Seat Belt Rear Inner
- Position: Rear Inner
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Center Seat Belt, Black, Rear Part Number: 6KE141X9AC
$117.62 MSRP: $206.00
You Save: $88.38 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt-2ND Rear Center; Seat Belt 2ND Rear Center Includes Left Passenger Buckle
- Position: Rear Center
- Replaces: 6KE141X9AB, 6KE141X9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Chrysler 300 | C, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Lap & Shoulder Belt, Gray, Front Outer Driver Side Part Number: UX531DVAE
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Left; Retractor Assembly; Seat Belt Front Outer
- Position: Front Outer Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

| Page 1 of 4 |Next >

1-20 of 72 Results

Chrysler 300 Seat Belt

Choose OEM Seat Belt that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Seat Belt follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler 300 Seat Belt Parts and Q&A

Lap & Shoulder Belt, Gray, Front Outer Driver Side
UX531DVAE
Q: How to Maintain Your Front Seat Belt on Chrysler 300?
A:
Start the service of the front seat belt by first separating and blocking the battery negative cable. You should wait for two minutes after this to avoid any chance of an accidental air bag deployment. Take out the trim cover on the seat cushion, then lift the seat belt lower anchor nut off the frame. Remove the upper turning loop trim cover, the upper turning loop bolt and then pull out the lower B-pillar trim after that. Take out the tensioner squib connector and unscrew the front seat belt web guide. Between the upper retractor indexing tabs in the B-pillar, remove the screw and remove the bolt that keeps the front seat belt retractor in place. With the retractor inward, release the indexing tabs that are attached to the B-pillar. To install, set the retractor in the B-pillar so its indexing tabs are lined up and then bolt it securely. Place the upper retractor tabs against the screw, connect the following two short connectors and bolt the front seat belt web guide. Bolt the upper turning loop retainer, secure everything with 40 N.m and install the associated trim panels. Secure the seat belt to the buckle stud on the cushion frame and put the lower anchor nut into place, adjusting it to 37 N.m. Once that is done, connect the trim cover back to the seat cushion's outboard trim corner. Do not hook up the battery negative cable until the system test has been carried out to help save your life or prevent injury.
Buckle End, Dark Gray, Rear Inner
1BY491DVAB
Q: How to Properly Install Seat Belts in Sedans and Wagons on Chrysler 300?
A:
Place the retractor in the B-pillar at the right place and secure it with the butt end of the indexing tabs as indicated. After that, tighten the threaded end of the retractor retaining bolt to 32 Nm. Following that, fit the screw between the retractor tabs on the B-pillar, connect the tensioner squib wire and screw the front seat belt web guide in place, torqued to 3 Nm. Locate the upper turning loop and tighten the retaining bolt to 40 Nm, then stand the upper turning loop trim cover on top and push in the lower B-pillar trim. Clip the seat belt onto the Seat Cushion stud and secure the lower anchor nut, torqued to 37 Nm and lastly fit the trim cover to the outboard part of the seat cushion. The rear seat belt installation in a sedan involves sliding the indexing tab up on the back part of the C-pillar, securing the upper turning loop retaining bolt and torquing it to 40 Nm and attaching the lower seat anchor bolt to the C-pillar, torqued to 32 Nm. Instead of placing the rear seat belt retractor right, place it so that the indexing tab is in its slot and afterward lock with a 34 Nm nut. After that, mount the quarter trim panel and the lower seat belt anchor bolt, applying both a 32 Nm torque. With the rear center retractor in place, soften the retaining nut with a 6mm hexagon key at 34 Nm, then fit the rear seat trim, soften the lower anchor nut with a 6mm hexagon key at 34 Nm and set the rear seat cushion. Place the rear center retractor at the center back, put the bolt holding the retractor in place, torch it to 34 Nm and then install the left seat back cover.