How to Service and Repair a Throttle Body on Chrysler 300M?

Before servicing the throttle body, unhook the battery's negative cable, pull off the wiper arms, remove the cowl screen and remove the cowl plenum. After that, separate the air plenum from the throttle body, take off the throttle cable bracket and pull the electrical connectors and top hose off. Build your ML112 Boxer Engine by undoing the three throttle body bolts and pulling out the throttle body lower support bracket, both underneath the throttle body. Put the throttle lever all the way up and disconnect both throttle and speed control cables from the throttle arm, then clean both the cable and throttle connection points. Installation requires you to keep the throttle jumping up and down while sliding in the throttle cable and the speed control cable. Secure the throttle body and nuts with 105 in. lbs. of torque. Fix the throttle body support bracket under the throttle body and clamp the bolts until they reach 27.1 Nm (20 ft. lbs.) of torque. Replace the vacuum hose, throttle cable bracket and secure them with bolts. Then, add on the air plenum and fasten its clamp, next the cowl plenum, cowl screen and wiper arms. In the end, secure the negative cable back to the battery.

OEM Chrysler 300M Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Throttle Bodies found

View related parts
Chrysler 300M Throttle Body Part Number: 4591168AD
$193.74 MSRP: $285.00
You Save: $91.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler 300M | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Throttle Body Part Number: 4591595AC
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Chrysler 300M | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Throttle Body Part Number: 5102020AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Chrysler 300M | Base, Special | 6 Cyl 3.5 L GAS

Chrysler 300M Throttle Body

Choose OEM Throttle Body that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Throttle Body follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300M matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300M parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

One of the vital automobile components of the Chrysler 300M is the Throttle Body that has the role of controlling the intake of air to the engine mostly through the use of a throttle valve. A great achievement is the Chrysler 300M Throttle Body, which is noted for its dependability and performance, it contains a butterfly valve, for responding to accelerator movement for enabling a better air intake together with the adjustment of the fuel delivery with the help of the Powertrain Control Module or PCM. This integration is especially critical in Chrysler 300M vehicles with ETC to sharp engine control, improve transmission, and effectiveness subject to elaborate safe practices. The Chrysler 300M Throttle Body may also have an Idle Air Control (IAC) valve, whose function is to control the amount of air that flows through it and at what speed, so as to provide a smooth idle. One of its key features Part compatibility to different Chrysler 300M model establishes its flexibility and is a part of every model group. Cleaning or even changing the Throttle position sensor or; Idle air control valve; It is also important to perform at least routine maintenance in order to continue enjoying the Chrysler 300M Throttle Body efficiency. Individual components, including the higher performance versions, make it stand out in the car market and offer the fun drive to the car lovers. In its entirety, the Chrysler 300M Throttle Body plays its role to make the vehicle powerful with its 3.5L V6 engine and adds to the enjoyment of the driving 'beyond the basics' of the Chrysler 300M.

Chrysler 300M Throttle Body Parts and Q&A

Throttle Body
4591595AC
Q: How to Service and Repair a Throttle Body on Chrysler 300M?
A:
Before servicing the throttle body, unhook the battery's negative cable, pull off the Wiper Arms, remove the cowl screen and remove the cowl plenum. After that, separate the air plenum from the throttle body, take off the Throttle Cable bracket and pull the electrical connectors and top hose off. Build your ML112 Boxer Engine by undoing the three throttle body bolts and pulling out the throttle body lower support bracket, both underneath the throttle body. Put the throttle lever all the way up and disconnect both throttle and speed control cables from the throttle arm, then clean both the cable and throttle connection points. Installation requires you to keep the throttle jumping up and down while sliding in the throttle cable and the speed control cable. Secure the throttle body and nuts with 105 in. lbs. of torque. Fix the throttle body support bracket under the throttle body and clamp the bolts until they reach 27.1 Nm (20 ft. lbs.) of torque. Replace the vacuum hose, throttle cable bracket and secure them with bolts. Then, add on the air plenum and fasten its clamp, next the cowl plenum, cowl screen and wiper arms. In the end, secure the negative cable back to the battery.