How to Safely Remove and Service a Blower Motor on Chrysler Aspen?

Disable the air bag which will stop current from entering the motor, by first cutting the cable to the air bag system's battery terminal and allowing it to discharge for two minutes. Open by removing the right front door scuff plate and the right cowl side trim panel. After that, remove the wire harness connection from the blower motor. Take away the three screws on the HVAC housing that connect the blower motor and blower wheel assembly and then take the blower motor and blower wheel out.

How to Install a Blower Motor into an HVAC Housing on Chrysler Aspen?

To place the blower motor and blower wheel assembly into the HVAC housing, first hold the assembly and serve it with three screws. Set each screw to a tightness of 2.2 Nm (20 in. lbs.). Snap the harness connector into the blower motor and then secure the cowl trim and front door scuff plate in the correct places. After everything else is completed, reconnect the negative battery cable.

OEM Chrysler Aspen Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blower Motors found

View related parts
Chrysler Aspen Blower Motor, Rear Part Number: 5019640AB
$118.88 MSRP: $197.00
You Save: $78.12 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor, Rear; Motor Blower With Wheel
- Position: Rear
- Replaces: 5019640AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Aspen | Limited | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Blower Motor, Front Part Number: 5061381AA
$208.30 MSRP: $308.00
You Save: $99.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor, Front; Blower Assembly; Motor Blower With Wheel And Cap; HVAC Blower Motor
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Blower Motor, Rear Part Number: 68046013AA
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor, Rear; Motor Blower With Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Blower Motor, Front Upper Part Number: 68057727AA
Product Specifications
- Other Name: Housing - A/C And Heater; HVAC Unit Case, Front Upper; HVAC Unit Case Assembly; Housing Assembly; Case Assembly; A/C & Heater Case
- Position: Front Upper
- Replaces: 68019146AA, 5166115AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Chrysler Aspen Blower Motor

Choose OEM Blower Motor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Blower Motor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Aspen Blower Motor refers to a part of Chrysler Aspen vehicles that are used when it comes to the car's heating, ventilation, and cooling systems which are famous due to their quality and effectiveness. This Blower Motor effectively distributes warm or cool air inside the car's interior to enhance the overall comfort of everybody in the car. Being an important component in the Chrysler Aspen, models, the Blower Motor is responsible for the fast regulation of the temperature that improves efficiency and safety, especially in extreme weather conditions. Depending on its make and model, Chrysler Aspen may use a single blower motor for cooling or heating, but there are vehicles that may even use a dual blower motor system for a better climate control especially those Chrysler Aspen types of SUVs and vans. This makes it possible for the Chrysler Aspen to regulate internal temperatures in relation to the external conditions. The Blower Motor should be maintained more often due to the problem with the electronic control module, or wiring which compromises the temperature in the cabin. Chrysler Aspen is a stylish full-size luxury SUV with powerful engines, comfortable interiors suitable for families. More to it, the Blower Motor adds to the design of the Chrysler Aspen, and thus making it a perfect brand when it comes to driving. New inventions, like the power of the Chrysler Aspen Blower Motor to defog windows in the shortest time possible as well as cool the interiors effectively differentiate this automotive part in the market and affirm the company's quality and reliability.

Chrysler Aspen Blower Motor Parts and Q&A

Blower Motor, Front
5061381AA
Q: How to Safely Remove and Service a Blower Motor on Chrysler Aspen?
A:
Disable the air bag which will stop current from entering the motor, by first cutting the cable to the air bag system's battery terminal and allowing it to discharge for two minutes. Open by removing the right front door scuff plate and the right cowl side trim panel. After that, remove the wire harness connection from the blower motor. Take away the three screws on the HVAC housing that connect the blower motor and blower wheel assembly and then take the blower motor and blower wheel out.
Blower Motor, Rear
68046013AA
Q: How to Install a Blower Motor into an HVAC Housing on Chrysler Aspen?
A:
To place the blower motor and blower wheel assembly into the HVAC housing, first hold the assembly and serve it with three screws. Set each screw to a tightness of 2.2 Nm (20 in. lbs.). Snap the harness connector into the blower motor and then secure the cowl trim and front door scuff plate in the correct places. After everything else is completed, reconnect the negative battery cable.