How to Remove and Service a Rear Sway Bar Link on Chrysler Aspen?

You should start by lifting the vehicle and supporting it and next remove the rear wheel. Support the back of the vehicle with a jack then pull off the skid plate to remove the left side sway bar link. After that, take out the rear fuel tank strap bolt and let the strap hang on its own. Roll the fuel tank toward the drive shaft, then use a block of wood to raise the fuel tank away from the frame and give space for the upper bolts. After that, get rid of the upper link nut and bolt on the frame, then take out the lower link nut from the sway bar. Afterward, take out the sway bar link.

How to Install a Front Sway Bar Link on Chrysler Aspen?

The first step to installing the front sway bar link is to connect sway link (7) onto the vehicle. Then, add the retainers, grommets and upper nut to the sway bar (6) and tighten them to 54 Nm (40 ft. lbs.). After that, set and tighten the lower nut to 169 Nm (125 ft. lbs.). At the end, take out the support and bring the vehicle down.

OEM Chrysler Aspen Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
Chrysler Aspen Stabilizer Link, Front Part Number: 5135751AC
$69.06 MSRP: $102.00
You Save: $32.94 (33%)
Product Specifications
- Other Name: Link - Stabilizer Bar; Front Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link; Link Kit Stabilizer Bar; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Replaces: 5135751AA, 5135751AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Stabilizer Link, Rear Part Number: 55398928AB
Product Specifications
- Other Name: Link - Stabilizer Bar; Rear Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link; Link Kit Stabilizer Bar; Link Stabilizer Bar; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: 52113285AA, 55398928AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Chrysler Aspen Sway Bar Link

Choose OEM Sway Bar Link that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Sway Bar Link follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Sway Bar Link is a very important part of Chrysler Aspen that plays a very crucial role in the overall reliability and performance of the kind of vehicle during functions such as cornering by minimizing body roll. Sway Bar Link joins the Sway bar to the suspension elements and thus makes the Chrysler Aspen cope with vandal movements that make the travel ultra-smooth for all individuals both the driver and guests. This feature is highly significant to the different Aspen models manufactured between 2006 and 2008 due to holding a major role in controlling the weight distribution as well as handling characteristics, elements important for a full-size SUV. The Chrysler Aspen, which garnered recognition for its luxury, greatly defines its interior roominess as well as the towing capacity, could be positively impacted by the Sway Bar Link to enabling the smooth transfer of motion between the sway bar as well as the control arm. This link not only optimizes the performance of the car but also is an important factor in reducing the cases of the flip over during sharp cornering mechanisms. By being easily adaptable with various models of Aspen automobiles, it guarantees that all drivers can have the benefits deriving from the Sway Bar Link. Also, it should be stated that Chrysler Aspen Sway Bar Link doesn't stay out of the automotive market list because of the excellent performance and reliability at the similar quality construction. In all, Chrysler Aspen Sway Bar Link is clear indication and confirmation of what Chrysler Company is made up of when it comes to quality and performance of their vehicles especially in the world of SUV market.

Chrysler Aspen Sway Bar Link Parts and Q&A

Stabilizer Link, Rear
55398928AB
Q: How to Remove and Service a Rear Sway Bar Link on Chrysler Aspen?
A:
You should start by lifting the vehicle and supporting it and next remove the rear wheel. Support the back of the vehicle with a jack then pull off the skid plate to remove the left side sway bar link. After that, take out the rear Fuel Tank strap bolt and let the strap hang on its own. Roll the fuel tank toward the Drive Shaft, then use a block of wood to raise the fuel tank away from the frame and give space for the upper bolts. After that, get rid of the upper link nut and bolt on the frame, then take out the lower link nut from the sway bar. Afterward, take out the sway bar link.
Stabilizer Link, Front
5135751AC
Q: How to Install a Front Sway Bar Link on Chrysler Aspen?
A:
The first step to installing the front sway bar link is to connect sway link (7) onto the vehicle. Then, add the retainers, grommets and upper nut to the sway bar (6) and tighten them to 54 Nm (40 ft. lbs.). After that, set and tighten the lower nut to 169 Nm (125 ft. lbs.). At the end, take out the support and bring the vehicle down.