How to Properly Service a Back Up Light Switch on a Chrysler Crossfire?

First take the negative battery cable off and move the shifter to reverse before working on the back up lamp switch. Pick up and hold the vehicle in place, cut off the battery connector cable and take out the back up lamp switch bolt. Take off the back up lamp switch and O-ring seal found in the transmission. First, put the new O-ring seal on the back up lamp switch and fit it into place, then add the retaining bolt and tighten it to 10 Nm (89 inch lbs.). Attach the back up lamp switch harness connector, lower the vehicle, put on the negative cable and make sure the back up lamps are working properly.

How to Maintain a Back Up Light Switch on Chrysler PT Cruiser?

Raise your car on a hoist before handling the back up lamp switch. From underneath the vehicle, take out the connection for the back up lamp switch. Detach the switch from the transaxle. During installation, thread some Teflon tape onto the switch threads and use a torque of only 24 Nm (18 ft. lbs.). Reconnect the cable going to the back up lamp switch, raise the car and check the back up lamp works correctly.

OEM Chrysler Back Up Light Switch

Reverse Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Back Up Light Switches found

View related parts
Chrysler Back-Up Switch Part Number: 4864775
$49.65 MSRP: $72.85
You Save: $23.20 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Back Up Lamp; Switch, Back - Up Lamp; Switch Back Up Lamp
Fits the following Chrysler Models:
- Cirrus | 1995-2000 | LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
- PT Cruiser | 2001-2010 | Base, Classic, Couture Edition, Dream, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
- Sebring | 2001-2005, 1995-1999 | Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View More
View related parts
Chrysler Back-Up Switch Part Number: 5083756AA
$208.30 MSRP: $297.00
You Save: $88.70 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Back Up Lamp; Back Up Light Switch; Switch Back Up Lamp
Fits the following Chrysler Models:
- PT Cruiser | 2003-2009 | Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Neutral Safety Switch Part Number: 68089074AA
$48.02 MSRP: $69.30
You Save: $21.28 (31%)
Product Specifications
- Other Name: Switch - Back Up Lamp; Back Up Light Switch; Back-Up Switch; Switch Back Up Lamp
- Replaces: 5099770AA
Fits the following Chrysler Models:
- Crossfire | 2004-2008 | Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
Chrysler Back-Up Switch Part Number: 4373814
Product Specifications
- Other Name: Switch - Back Up Lamp; Back Up Light Switch; Back - Up Lamp, (Use Gasket 1302807); includes switches for 2.2 Engine (Manual).
Fits the following Chrysler Models:
- E Class | 1984 | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.6 L GAS
- Executive Limousine | 1985 | Base | 4 Cyl 2.6 L GAS
- Executive Sedan | 1984 | Base | 4 Cyl 2.6 L GAS
- Laser | 1984-1986 | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
- LeBaron | 1984-1994 | Base, GT, GTC, GTS, High Line, LE, LX, Landau, Mark Cross, Premium | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
- New Yorker | 1984-1988 | Base, Landau, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
- TC Maserati | 1989-1991 | Base | 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
- Town & Country | 1990-1993, 1984-1988 | Base, Mark Cross | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Neutral Safety Switch Part Number: 3747361AB
Product Specifications
- Other Name: Switch - Neutral Safety, Back Up; Range Sensor; Back-Up Switch
- Replaces: 3747361, P5007747, P5007747AB
Fits the following Chrysler Models:
- E Class | 1984 | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.6 L GAS
- Executive Limousine | 1985 | Base | 4 Cyl 2.6 L GAS
- Executive Sedan | 1984 | Base | 4 Cyl 2.6 L GAS
- Fifth Avenue | 1984-1989 | Base | 5.2L V8, 8 Cyl 5.2 L GAS
- Grand Voyager | 2000 | Base, SE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Imperial | 1990-1991 | Base | 3.3L V6, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Laser | 1984-1986 | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
- LeBaron | 1984-1994 | Base, GT, GTC, GTS, High Line, LE, LX, Landau, Mark Cross, Premium | 2.5L L4, 3.0L V6, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
- New Yorker | 1984-1993 | Base, Fifth Avenue, Landau, Salon, Turbo | 3.0L V6, 3.3L V6, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- TC Maserati | 1989-1991 | Base | 2.4L L4, 3.0L V6, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Chrysler Switch, Rear Part Number: 4671670AB
Product Specifications
- Other Name: Switch - Electric Back Light; Window Defroster Switch, Rear; Switch Electric Back Light
- Position: Rear
Fits the following Chrysler Models:
- PT Cruiser | 2001-2005 | Base, Dream, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler SENSOR-MANUAL VALVE LEVER Part Number: 4659677AD
$43.04 MSRP: $61.85
You Save: $18.81 (31%)
Fits the following Chrysler Models:
- 300 | 2005-2010 | 2.7L V6, 3.5L V6
- 300M | 1999-2004 | Base | 3.5L V6, 6 Cyl 3.5 L GAS
- Concorde | 1998-2004 | LX, LXi | 2.7L V6, 3.2L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS
- LHS | 1999-2001 | Base | 3.5L V6, 6 Cyl 3.5 L GAS
- Prowler | 2001-2002 | 3.5L V6
View More
View related parts
Chrysler Back-Up Switch Part Number: MD730979
Product Specifications
- Other Name: Switch - Gearshift Backup; Back Up Light Switch; Switch Assembly, Backup Light, Up To November 87; Gearshift Backup Lamp Switch.
Fits the following Chrysler Models:
- Sebring | 2004-2005 | Base | 4 Cyl 2.4 L GAS
View related parts
Chrysler Neutral Safety Switch Part Number: 5293187AC
Product Specifications
- Other Name: Switch - Clutch Starter Interlock
Fits the following Chrysler Models:
- PT Cruiser | 2004-2005 | Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

Chrysler Back Up Light Switch

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Back Up Light Switch for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Back Up Light Switch Parts and Q&A

Neutral Safety Switch
68089074AA
Q: How to Properly Service a Back Up Light Switch on a Chrysler Crossfire?
A:
First take the negative battery cable off and move the shifter to reverse before working on the back up lamp switch. Pick up and hold the vehicle in place, cut off the battery connector cable and take out the back up lamp switch bolt. Take off the back up lamp switch and O-ring seal found in the transmission. First, put the new O-ring seal on the back up lamp switch and fit it into place, then add the retaining bolt and tighten it to 10 Nm (89 inch lbs.). Attach the back up lamp switch harness connector, lower the vehicle, put on the negative cable and make sure the back up lamps are working properly.
Back-Up Switch
4864775
Q: How to Maintain a Back Up Light Switch on Chrysler PT Cruiser?
A:
Raise your car on a hoist before handling the back up lamp switch. From underneath the vehicle, take out the connection for the back up lamp switch. Detach the switch from the transaxle. During installation, thread some Teflon tape onto the switch threads and use a torque of only 24 Nm (18 ft. lbs.). Reconnect the cable going to the back up lamp switch, raise the car and check the back up lamp works correctly.