How to Install a Starter Motor on Chrysler Crossfire?

Begin your installation by fitting the starter. After that, use the nuts to secure the starter positive cable to the starter wiring connector and tighten the starter positive cable nut to 14 Nm (10 ft. lbs.) and the starter ground cable nut to 6 Nm (52 in. lbs.). When that part is done, put on the plastic cap for the starter positive cable. String the starter bolts, finishing by tightening them to 42 Nm (31 ft. lbs.). At this step, place the right side exhaust pipe and hook up the right side O2 sensor. After that, attach the lower engine panel and lower the vehicle. The next step is to attach the negative battery cable.

OEM Chrysler Crossfire Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Starter Motor found

View related parts
Chrysler Crossfire Starter Part Number: R5134377AB
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

Chrysler Crossfire Starter Motor

Choose OEM Starter Motor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Starter Motor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Crossfire Starter Motor Parts and Q&A

Starter
R5134377AB
Q: How to Install a Starter Motor on Chrysler Crossfire?
A:
Begin your installation by fitting the starter. After that, use the nuts to secure the starter positive cable to the starter wiring connector and tighten the starter positive cable nut to 14 Nm (10 ft. lbs.) and the starter ground cable nut to 6 Nm (52 in. lbs.). When that part is done, put on the plastic cap for the starter positive cable. String the starter bolts, finishing by tightening them to 42 Nm (31 ft. lbs.). At this step, place the right side Exhaust Pipe and hook up the right side O2 sensor. After that, attach the lower engine panel and lower the vehicle. The next step is to attach the negative battery cable.