How to install an Idler Arm on Chrysler Crossfire?

The first step to installing the idler arm for a left-hand drive vehicle is to install the idler arm bushing to idler arm 4 and set it at the required dimension. Afterward, place the idler arm pinch bolt and tighten it to 30 Nm (22 ft. lbs.). After that, put the idler arm onto the vehicle and tighten it to the vehicle with the nut and bolt which should be fastened to 50 Nm (37 ft. lbs.). The next step is to install the second heat shield and tighten the drag link to the idler arm at 50 Nm (37 ft. lbs.).

OEM Chrysler Idler Arm

Steering Idler Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Idler Arm found

View related parts
Chrysler Idler Arm Part Number: 5101586AA
Product Specifications
- Other Name: Arm - Idler; Steering Idler Arm; Pitman Arm; Arm Idler
Fits the following Chrysler Models:
- Crossfire | 2004-2008 | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

Chrysler Idler Arm

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Idler Arm for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Idler Arm Parts and Q&A

Idler Arm
5101586AA
Q: How to install an Idler Arm on Chrysler Crossfire?
A:
The first step to installing the idler arm for a left-hand drive vehicle is to install the idler arm bushing to idler arm 4 and set it at the required dimension. Afterward, place the idler arm pinch bolt and tighten it to 30 Nm (22 ft. lbs.). After that, put the idler arm onto the vehicle and tighten it to the vehicle with the nut and bolt which should be fastened to 50 Nm (37 ft. lbs.). The next step is to install the second heat shield and tighten the drag link to the idler arm at 50 Nm (37 ft. lbs.).