OEM Chrysler LHS Throttle Cable

Chrysler LHS Throttle Cable Parts and Q&A

• Throttle Cable
  4591233AB
  Q: How to Maintain a Throttle Cable Without Damaging the Core Wire on Chrysler LHS?

  A:

  Do not damage or bend the core wire inside the cable sheathing while servicing the accelerator pedal, throttle cable or speed control cable. From inside the engine compartment, hold the Throttle Body throttle lever open wide, pull the throttle cable out forward and remove it from the cam. Now, inside the car, push the pedal down and pull the cable retainers and cable off the mouth of the pedal shaft. Unclip the retainer from the throttle cable and grommet by the dash panel, then remove the throttle cable from the grommet held in place by the car. Press both retaining ears and slide the throttle cable off the throttle bracket; then, gently pull the cable from the throttle. To install it, push the housing for the dash panel fitting into the grommet from inside the vehicle and put the cable housing at the throttle body into the cable mounting bracket on the engine. From within the vehicle, press down the pedal and fit the throttle cable and cable retainer on the top end of the pedal's shaft. At the dash panel, connect the retainer clip to the throttle cable's terminus between the fitting and its grommet, then do the same in the engine bay, rotate the throttle lever to wide open and fit the cable in place.