How to Service the Blower Motor Under the Passenger Side Instrument Panel on Chrysler Pacifica?

Start by pulling out and isolating the negative battery cable to temporarily disable the air bag system, wait for two minutes for everything to clear and then work on the blower motor for the passenger side. First, take out the trim from the passenger side cowl and place the carpet aside to reach the front upper air inlet housing. Separate the wire from the inside of the recirculation door actuator and take the actuator out of the car. Following that, remove the wire lead connector from the blower motor resistor or power module. Unscrew the air inlet housing closest to the rear and then remove the four lower inlet housing screws connecting it to the upper air inlet housing and lower HVAC housing. Route the rubber seal through the opening in the lower air inlet housing, pass the blower motor lead and connector through the same opening and remove the housing from the vehicle. Open the recirculation-air door enough to be able to get in and undo the screws around the edges of the blower motor. With care, close the recirculation-air door and move it down to release the blower motor from the HVAC housing while noting the blower motor mounting tabs first, then rotate and tilt the motor to get it out.

OEM Chrysler Pacifica Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motors found

View related parts
Chrysler Pacifica Blower Motor, Front Part Number: 4885475AC
$139.38 MSRP: $211.00
You Save: $71.62 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly, Front & Rear; Blower Assembly; Motor Blower With Wheel
- Position: Front
- Replaces: 4885475AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Blower Motor, Rear Part Number: 5183147AC
$253.79 MSRP: $375.00
You Save: $121.21 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly, Rear; HVAC Blower Motor, Rear; HVAC Blower Motor; Blower Assembly
- Position: Rear
- Replaces: 5183147AA, 5183147AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Blower Motor, Front Part Number: 68308952AD
$495.57 MSRP: $699.00
You Save: $203.43 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly, Front
- Position: Front
- Replaces: 68308952AC, 68308952AA, 68308952AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)

Chrysler Pacifica Blower Motor

Choose OEM Blower Motor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Blower Motor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Pacifica Blower Motor is one of the crucial parts of the HVAC system because it distributes heated or cooled air in the car interior. Chrysler Pacifica Blower Motor is famous for its durability and efficiency, it works through the fan that blows air to make passengers comfortable. The outlined essential part may connect to numerous Pacifica models, which might have diversified layouts such as single or dual motors for climate control of the front and rear compartments. This level of flexibility is not only effective for increasing productivity but is also very helpful for the protection of the car because the interior climate does not distract the driver. Thus, proper care and maintenance of the Chrysler Pacifica Blower Motor are imperative to avoid scenarios that would hinder the regulation of airflow, providing maximum efficiency to the system. The major attributes of Chrysler Pacifica Blower Motor are its high withstand and compatibility with the vehicle's electronics by which it is possible to fine tune the blowing and heating process. This attention is specific to Chrysler, as it clearly shows that it is focused comprehensive quality and new technology in automobile industries. From some of the glowing titles as the 'premier Minivan of 2016' to the '2020 premier Family Car,' Chrysler Pacifica remains a benchmark and its Blower Motor contributes immensely to offering the comfort and durability that driver's associate with this fantastic car brand.

Chrysler Pacifica Blower Motor Parts and Q&A

Blower Motor, Front
4885475AC
Q: How to Service the Blower Motor Under the Passenger Side Instrument Panel on Chrysler Pacifica?
A:
Start by pulling out and isolating the negative battery cable to temporarily disable the air bag system, wait for two minutes for everything to clear and then work on the blower motor for the passenger side. First, take out the trim from the passenger side cowl and place the carpet aside to reach the front upper air inlet housing. Separate the wire from the inside of the recirculation door actuator and take the actuator out of the car. Following that, remove the wire lead connector from the Blower Motor Resistor or power module. Unscrew the air inlet housing closest to the rear and then remove the four lower inlet housing screws connecting it to the upper air inlet housing and lower HVAC housing. Route the rubber seal through the opening in the lower air inlet housing, pass the blower motor lead and connector through the same opening and remove the housing from the vehicle. Open the recirculation-air door enough to be able to get in and undo the screws around the edges of the blower motor. With care, close the recirculation-air door and move it down to release the blower motor from the HVAC housing while noting the blower motor mounting tabs first, then rotate and tilt the motor to get it out.