How to Properly Install a Crankshaft Seal Without Causing Damage on Chrysler Pacifica?

For the crankshaft main bearing seal, make sure all burrs and scratches around the crankshaft edge are removed with 400 grit sandpaper before installing. After that, attach Special Tool 6926-1 magnetic pilot tool to the crankshaft. After that, seal the assisting tool over Special Tool 6926-1 Pilot and drive the seal into the retainer housing with Special Tool 6926-2 Installer and C-4171 Handle. Once the seal is in place, place the flex plate and then lower in the transmission.

How to Remove and Service a Crankshaft Seal on Chrysler Pacifica?

First, take out the transmission and after that remove the flex plate to access the crankshaft main bearing seal. Then, insert a 3/16 flat pry tool between the dust sealing edge and the metal case of the crankshaft seal and push the pry tool through the dust lip and against the case with an angle. Pry the seal open without touching the surface of the crankshaft seal, but slight contact with the crankshaft's chamfer can happen.

OEM Chrysler Pacifica Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Crankshaft Seals found

View related parts
Chrysler Pacifica Crankshaft Seal, Front Part Number: 68079589AA
$19.35 MSRP: $28.65
You Save: $9.30 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Crankshaft (Front); Harmonic Balancer; Water Pump (O-Ring); Timing Cover; Front Crank Seal; Water Pump Seal; Oil Seal; Crankshaft Oil Front; Engine Crankshaft Seal
- Position: Front
- Replaces: 5184541AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Oil Seal, Front Part Number: 4792317AB
$18.27 MSRP: $26.25
You Save: $7.98 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.
- Position: Front
- Replaces: 4792317, 4273275
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Rear Main Seal Retainer Part Number: 68245707AD
$33.29 MSRP: $48.70
You Save: $15.41 (32%)
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Rear Oil; Retainer And Seal Crankshaft Rear Oil
- Position: Rear
- Replaces: 68245707AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Rear Main Seal Part Number: 4663625
$32.82 MSRP: $42.24
You Save: $9.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Main Seal Gasket; Seal Rear Main Crankshaft See Note; Seal Rear Main Crankshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS
View related parts
Chrysler Pacifica Rear Main Seal Part Number: 4654389AB
$26.69 MSRP: $30.65
You Save: $3.96 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Rear Main Seal Retainer; Includes Rear Seal and Crankshaft Rear Oil Seal.
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler Pacifica | Base | 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Rear Main Seal Part Number: 4663870AC
$131.33 MSRP: $174.00
You Save: $42.67 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil; Engine Crankshaft Seal; Crankshaft Seal; Rear Main Seal Retainer; Retainer And Seal Crankshaft Rear Oil
- Position: Rear
- Replaces: 4663870AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.5L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Rear Main Seal Retainer Part Number: 4654389AC
$33.06 MSRP: $47.65
You Save: $14.59 (31%)
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Pacifica | LX | 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Rear Main Seal Part Number: 4663870
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal; Crankshaft Seal; Rear Main Seal Retainer; Retainer Crankshaft Rear Oil Seal See Note; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Chrysler Pacifica | Base | 6 Cyl 3.5 L GAS

Chrysler Pacifica Crankshaft Seal

Choose OEM Crankshaft Seal that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Crankshaft Seal follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Pacifica Crankshaft Seal is well known to be a critical part that functions in carrying out the tasks that are needed in Chryslr's Pacifica automobiles. Sitting at the front of the engine, this Crankshaft Seal helps to eliminate any oil leaks that might occur at the crankcase with the aim of allowing proper lubrication of the engine. Made from a material that is a combination of metal and rubber, Chrysler Pacifica Crankshaft Seal decreases the rate of friction between the crankshaft and the block while at the same time cutting down on wear and tear of other parts within the Chrysler engine thus increasing its efficiency and safety. Over the depth, compatibility has been upheld making it possible for it to fit different models of the Pacifica and years as well as trims. A major problem arising from a bad crankshaft seal is large amounts of oil leakage mainly in high mileage Chrysler Pacifica hence replacement is important for proper functioning of the engine. The automotive market has different Crankshaft Seal for Chrysler Pacifica but the prime Crankshaft Seal is known for its toughness and durability or quality which gains its popularity among the users. Also, its contribution in the protection of the engine cannot be overlooked, given that it has a direct bearing on the functional capacity of the car. Seeing how the Chrysler Pacifica has been rated well for its performance and amenities tailored for families, it become vital that the Crankshaft Seal be of the superior quality so that the drivers do not experience any issues on the road. Altogether, the Chrysler Pacifica Crankshaft Seal is the ideal enunciation to Chrysler's great quality and efficiency operating in the present auto market.

Chrysler Pacifica Crankshaft Seal Parts and Q&A

Oil Seal, Front
4792317AB
Q: How to Properly Install a Crankshaft Seal Without Causing Damage on Chrysler Pacifica?
A:
For the Crankshaft main bearing seal, make sure all burrs and scratches around the crankshaft edge are removed with 400 grit sandpaper before installing. After that, attach Special Tool 6926-1 magnetic pilot tool to the crankshaft. After that, seal the assisting tool over Special Tool 6926-1 Pilot and drive the seal into the retainer housing with Special Tool 6926-2 Installer and C-4171 Handle. Once the seal is in place, place the flex plate and then lower in the transmission.
Rear Main Seal
4654389AB
Q: How to Remove and Service a Crankshaft Seal on Chrysler Pacifica?
A:
First, take out the transmission and after that remove the flex plate to access the Crankshaft main bearing seal. Then, insert a 3/16 flat pry tool between the dust sealing edge and the metal case of the crankshaft seal and push the pry tool through the dust lip and against the case with an angle. Pry the seal open without touching the surface of the crankshaft seal, but slight contact with the crankshaft's chamfer can happen.