How to Install an Oil Pan on Chrysler Pacifica?

Clean the sealing surfaces first and then apply a 1/8 inch ring of Mopar(R) Engine RTV GEN II where the chain case cover and the rear seal retainer come together. Now, line up a new gasket around the edge of the oil pan. Put in the oil pan and tighten all the fasteners until they reach 12 Nm (105 in. lbs.). Later, secure the flex plate cover and then put on the right engine mount bracket. Link up the in block heater and place the suitable engine mount heat shield if it comes with the kit. Unhook the coil from the suspension, put the car on lower jack stands and attach the oil level indicator. After finishing everything else, top off the oil so the level inside the crankcase is correct.

How to Remove and Replace an Oil Pan on Chrysler Pacifica?

Before you remove and replace the oil pan, disconnect the negative battery cable and remove the engine oil indicator tube. After that, take the vehicle up on a hoist and drain the engine oil. Unbolt the right engine mount heat shield and cut any hoses to disconnect the in block heater, if the car has one. Removing the right engine mount structural bracket is done at the engine and transaxle after removing the flex plate inspection cover. In the end, unbolt the oil pan and take both it and the gasket off the engine.

OEM Chrysler Pacifica Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Oil Pans found

View related parts
Chrysler Pacifica Oil Pan Part Number: 68431654AA
$462.84 MSRP: $832.00
You Save: $369.16 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Oil; Engine Oil Pan
- Replaces: 4792662AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Pacifica Oil Pan Part Number: 4892122AA
$296.14 MSRP: $452.00
You Save: $155.86 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Oil; Engine Oil Pan; Pan Oil Refer To Illustration 105 For Julian Date Code Information; Pan Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Oil Pan, Upper Part Number: 68249488AE
$157.22 MSRP: $238.00
You Save: $80.78 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan, Upper
- Position: Upper
- Replaces: 68249488AC, 68249488AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Oil Pan Part Number: 4648930AA
$97.54 MSRP: $202.00
You Save: $104.46 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan; Pan Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler Pacifica | Base, LX | 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Oil Pan Part Number: 4792662AB
$337.67 MSRP: $428.05
You Save: $90.38 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Oil; Engine Oil Pan; Pan Oil Build Date Codes Are Listed On Intake Plenum Tag
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Chrysler Pacifica | Base | 6 Cyl 3.5 L GAS

Chrysler Pacifica Oil Pan

Choose OEM Oil Pan that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Oil Pan follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Pacifica Oil Pan is known to be a part that is necessary for improving the usability of Chrysler Pacifica engine hence the reliability of use of Chrysler Pacifica engine. As the container for the engine oil which lies adjacent to the engine, the Oil Pan facilitates the routine and reliable supply of oil to the oil pump and hence the moving components of the engine where the oil is supposed to prevent the problem of oil starvation and support the efficient and optimal running of the engine. Out of all the components of the Chrysler Pacifica, the Oil Pan has transitioned from a stamped steel design to a heavier but much more efficient cast aluminum design. This evolution is crucial specifically for different Pacifica models, in particular for gasoline and a plug-in hybrid version as it takes into account the height of the engine and dynamic conditions. The ripple shape design of the Oil Pan has significant roles on the Chrysler Pacifica performance and safety that is very important to optimize the performance of the engines in different conditions. First of all, it has to be noted that Chrysler Pacifica Oil Pan design provides protection against oil leakage, which is critical for ensuring the appropriate oil level. It also forms a reliable hue because it can endure the regular use experience while at the same type enhancing the car's performance. The Chrysler Pacifica Oil Pan is easy to distinguish due to its fundamental features and highly resistant material, and playing a significant role in Chrysler Pacifica's vehicles, it helps maximize a comfortable driving experience without any risks.

Chrysler Pacifica Oil Pan Parts and Q&A

Oil Pan
4892122AA
Q: How to Install an Oil Pan on Chrysler Pacifica?
A:
Clean the sealing surfaces first and then apply a 1/8 inch ring of Mopar(R) Engine RTV GEN II where the chain case cover and the rear seal retainer come together. Now, line up a new gasket around the edge of the oil pan. Put in the oil pan and tighten all the fasteners until they reach 12 Nm (105 in. lbs.). Later, secure the flex plate cover and then put on the right engine mount bracket. Link up the in block heater and place the suitable engine mount heat shield if it comes with the kit. Unhook the coil from the suspension, put the car on lower jack stands and attach the oil level indicator. After finishing everything else, top off the oil so the level inside the crankcase is correct.
Oil Pan
4648930AA
Q: How to Remove and Replace an Oil Pan on Chrysler Pacifica?
A:
Before you remove and replace the oil pan, disconnect the negative battery cable and remove the engine oil indicator tube. After that, take the vehicle up on a hoist and drain the engine oil. Unbolt the right engine mount heat shield and cut any hoses to disconnect the in block heater, if the car has one. Removing the right engine mount structural bracket is done at the engine and transaxle after removing the flex plate inspection cover. In the end, unbolt the oil pan and take both it and the gasket off the engine.