Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM Chrysler Prowler Air Bag Control Module

SRS Airbag Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Bag Control Module found

  • Chrysler Prowler Air Bag Control Module - 4786638AC
    Chrysler Prowler Air Bag Control Module Diagram - 4786638AC
    View related parts

    Chrysler Prowler Diagnostic Module Part Number: 4786638AC

    Product Specifications
    • Other Name: Module - Air Bag Control; Diagnostic Unit; Module Air Bag Control
    • Replaces: 4786638AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2001-2002 Chrysler Prowler | Base | 6 Cyl 3.5 L GAS

Chrysler Prowler Air Bag Control Module

Choose OEM Air Bag Control Module that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Air Bag Control Module follows strict manufacturing steps to lock in quality and fit. If your Chrysler Prowler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Prowler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Prowler Air Bag Control Module Parts and Q&A

  • Chrysler Prowler Air Bag Control Module - 4786638AC Diagnostic Module Diagnostic Module
    4786638AC
    Q: How to Maintain the Air Bag Control Module on Chrysler Prowler?
    A:
    Before you start, disconnect and isolate the negative terminal of the battery. First, fold down the carpet over the front tunnel/floor pan to reach the ACM and remove the four attaching nuts. Then take the ACM out from the side of the vehicle closest to the passenger side. If you can't remove the module because the harness is too small, disconnect the radio and untangle the wire harness clip. After that, separate the ACM wire connectors from the car. After connecting the ACM wire harness connector, fix the ACM in the console floor bracket, so the arrow points forward, add the screws and tighten them to 11 to 14 Nm (105 to 125 in. lbs.). With the radio gone, set it up again, thread the wire harness and slide the carpet into place. You should not connect the negative Battery Cable until the air bag system has been checked and checked.

Related Chrysler Prowler Parts

Browse Chrysler Prowler Air Bag Control Module by Years

+
2002 2001