How to Service and Repair a Sway Bar Link on Chrysler Prowler?

Start the sway bar link service by taking the grille off the front of the car. After that, unscrew the nuts that associate the sway bar links with the rocker arms by slightly jacking up or down the vehicle if the bolts are strained. Disconnect both bolts holding the link between the sway bar and the rocker arm. Lift the vehicle and squeeze the sway bar arms to free the lock nuts holding the link. Hold the link stud steady with a Torx Plus 40 IP Bit as you take off the wrenchnut. As soon as the nut is off, take out the sway bar link from the sway bar. Start by placing the lower end of the sway bar link on the sway bar, so its stud is facing away from it and then put the nut on the stud with the Torx Plus 40 IP Bit while holding it in place. Close the nut up with a torque of 122 Nm (90 ft. lbs.) when using a crowfoot wrench. Move the sway bar arms upwards, place the links over the rocker arm holes and lower the car until the front tires are carrying the weight. Place the sway bar link bolts inside the holes in the rocker arm and insert nuts onto each bolt. With a flex socket and an extension, turn the sway bar link bolts to 60 Nm (45 ft. lbs.). Lastly, get the grille ready in place and use a hand-powered drill to tighten the four screws that secure the grille to the front structure.

OEM Chrysler Prowler Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
Chrysler Prowler Stabilizer Link, Rear Part Number: 4695831AB
$19.18 MSRP: $28.45
You Save: $9.27 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Sway Eliminator; Rear Suspension Stabilizer Bar Link Kit.; Link Kit; Link; Link And Isolator Sway Eliminator
- Position: Rear
- Replaces: 4695831
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Prowler | Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Prowler Stabilizer Link Part Number: 4786592AB
Product Specifications
- Other Name: Link - Sway Eliminator; Sway Bar Link; Link; Link Sway Eliminator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Prowler | Base | 6 Cyl 3.5 L GAS

Chrysler Prowler Sway Bar Link

Choose OEM Sway Bar Link that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Sway Bar Link follows strict manufacturing steps to lock in quality and fit. If your Chrysler Prowler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Prowler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Prowler Sway Bar Link can be regarded as a rather crucial component that plays a major part in the performance and functionality of the automobile. To be used for attaching the sway bar to the control arm, this Sway Bar Link enables the car to handle body roll particularly in cornering to ensure that the Chrysler Prowler will be able to have a good balance and control. The Sway Bar Link works to regulate the fact that the wheel assembly has the desire to move independently; it helps spread the weight of the vehicle evenly across the vehicle platform so that there are no efficiency or safety issues. Designed for the Chrysler Prowler, this Sway Bar Link will help to secure better motion transfer between the sway bar and the rest of the suspension to enhance movements. The Chrysler Prowler has an innovative design and a vigorous 3.5 L V6 engine; the Sway Bar Link is highly reliable making this vehicle's 0-60 endeavor in merely 7.2 seconds possible. In particular, the Sway Bar Link can be viewed as essentially significant in the automotive market as it is manufactured rather sturdy and aims to refine the car's handling, which is essential for the Chrysler Prowler. This Chrysler Prowler Sway Bar Link is clear and concrete evidence of Chrysler's devotion to superior quality automotive creation, a synthesis of stylish design and pure practicality.

Chrysler Prowler Sway Bar Link Parts and Q&A

Stabilizer Link, Rear
4695831AB
Q: How to Service and Repair a Sway Bar Link on Chrysler Prowler?
A:
Start the sway bar link service by taking the grille off the front of the car. After that, unscrew the nuts that associate the sway bar links with the Rocker Arms by slightly jacking up or down the vehicle if the bolts are strained. Disconnect both bolts holding the link between the sway bar and the rocker arm. Lift the vehicle and squeeze the sway bar arms to free the lock nuts holding the link. Hold the link stud steady with a Torx Plus 40 IP Bit as you take off the wrenchnut. As soon as the nut is off, take out the sway bar link from the sway bar. Start by placing the lower end of the sway bar link on the sway bar, so its stud is facing away from it and then put the nut on the stud with the Torx Plus 40 IP Bit while holding it in place. Close the nut up with a torque of 122 Nm (90 ft. lbs.) when using a crowfoot wrench. Move the sway bar arms upwards, place the links over the rocker arm holes and lower the car until the front tires are carrying the weight. Place the sway bar link bolts inside the holes in the rocker arm and insert nuts onto each bolt. With a flex socket and an extension, turn the sway bar link bolts to 60 Nm (45 ft. lbs.). Lastly, get the grille ready in place and use a hand-powered drill to tighten the four screws that secure the grille to the front structure.