How to Maintain and Fix a Rocker Arm on Chrysler Prowler?

The process begins by taking off the cylinder head covers to reveal and spot the rocker arm assembly and the rocker arms. Take out the rocker arm assembly bolts first and then the assembly, turn it on its side to prevent air from going to the lash adjusters and don't put it down on the lash adjusters to avoid damaging them. Then, take apart the mechanism by pulling out the rocker arm and shafts and remove the dowel pin using a 4 mm screw, nut, spacer and washer, be sure not to repeat their purpose. For any damage or wear on the rocker arm mounting part of the shafts, replace the shafts and ensure to clean any clogging inside the oil holes. If you find the rollers or shafts are worn, missing swivel pads or show cracks or rolls sticking out, exchange the rocker arms. Be careful not to take out the lash adjuster when working with the rocker arm assembly. For assembly, fit the new dowel pins, rocker arms and pedestals onto the shaft and press the dowel pins down so they meet the rocker shaft in the pedestal. The shaft and rocker arm assembly can be set up before the cylinder head is installed, but it is better to carry out that step after fitting the cylinder head. Turn the camshafts so they are in the neutral position, then place the rocker arm and shaft assembly by matching up the side marks with the heads. To finish, torque all rocker arm/shaft assembly bolts one after another to 31 Nm (275 in. lbs.) and replace the top of the cylinder head covers.

OEM Chrysler Prowler Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rocker Arms found

View related parts
Chrysler Prowler Exhaust Rocker Arms Part Number: 4663996
$73.76 MSRP: $113.00
You Save: $39.24 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Rocker Arm Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Prowler | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler Prowler Intake Rocker Arm Part Number: 4573460
$44.50 MSRP: $90.25
You Save: $45.75 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Exhaust Rocker Arms; Arm Assembly, Right Intake Rocker; Rocker Arm Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Prowler | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler Prowler Intake Rocker Arm Part Number: 4573459
$44.50 MSRP: $90.25
You Save: $45.75 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Exhaust Rocker Arms; Arm Assembly, Left Intake Rocker; Rocker Arm Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Prowler | Base | 6 Cyl 3.5 L GAS

Chrysler Prowler Rocker Arm

Choose OEM Rocker Arm that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Rocker Arm follows strict manufacturing steps to lock in quality and fit. If your Chrysler Prowler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Prowler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Prowler Rocker Arm inhibits the rocker arm of the Chrysler Prowler vehicles which proved its unpredicted reliability and outstanding performance. This component enables the transmission of the motion from the pushrod to the intake and exhaust valves, which makes the engine most efficient. Built from lightweight aluminum or stamped steel, the Rocker Arm is specifically enhanced to survive high-RPM which makes it as a notable feature on the Chrysler Prowler model. In particular, a substantial portion of the manufacturers of the Chrysler Prowler include roller rockers as part of the engine, as these elements involve needle bearings that eliminate friction and consequent failure, which sweetens the reputation of the Rocker Arm. Having a rocker ratio between 1.5:1 and 1.8:1, these parts increase the lift of camshaft and increases the engine power greatly. High-RPM engines have better fulcrum bearings that also added to the durabilty of the Rocker Arm system, so Chrysler Prowler vehicles will remain strong under stressful driving conditions. Compatibility between the Rocker Arm and different Prowler models suggests the product's necessity for a comfortable ride as an essential component of the car. Also, the Chrysler Prowler car that has exposed rims and light aluminum body is ideal to accompany the efficiency and safety offered by Rocker Arm. Altogether, the Chrysler Prowler Rocker Arm is shaping the automotive market as the unique and extraordinary addition to the car industry, as it directly determines the vehicle's performance and reliability as well as improves the driving experience.

Chrysler Prowler Rocker Arm Parts and Q&A

Exhaust Rocker Arms
4663996
Q: How to Maintain and Fix a Rocker Arm on Chrysler Prowler?
A:
The process begins by taking off the cylinder head covers to reveal and spot the rocker arm assembly and the rocker arms. Take out the rocker arm assembly bolts first and then the assembly, turn it on its side to prevent air from going to the lash adjusters and don't put it down on the lash adjusters to avoid damaging them. Then, take apart the mechanism by pulling out the rocker arm and shafts and remove the dowel pin using a 4 mm screw, nut, spacer and washer, be sure not to repeat their purpose. For any damage or wear on the rocker arm mounting part of the shafts, replace the shafts and ensure to clean any clogging inside the oil holes. If you find the rollers or shafts are worn, missing swivel pads or show cracks or rolls sticking out, exchange the rocker arms. Be careful not to take out the lash adjuster when working with the rocker arm assembly. For assembly, fit the new dowel pins, rocker arms and pedestals onto the shaft and press the dowel pins down so they meet the rocker shaft in the pedestal. The shaft and rocker arm assembly can be set up before the cylinder head is installed, but it is better to carry out that step after fitting the cylinder head. Turn the Camshafts so they are in the neutral position, then place the rocker arm and shaft assembly by matching up the side marks with the heads. To finish, torque all rocker arm/shaft assembly bolts one after another to 31 Nm (275 in. lbs.) and replace the top of the cylinder head covers.