How to Effectively Remove and Replace Brake Pads on Chrysler Sebring?

You have to raise and support the vehicle before removing and replacing the brake pads. Remove the wheel mounting nuts and get rid of the tire and wheel as a set. Also, remember to put the upper bolt's sleeve into place in the upper mounting hole after you remove all the guide pin bolts. Following that, separate both brake caliper guide pin bolts. Remove the caliper from the adapter bracket, use a wire or bungee cord to hang it out of the way and keep the brake hose from over extending. Also, pull the brake pads off the caliper adapter bracket before you remove anything else.

How to Install Brake Pads on Chrysler Sebring?

On both sides, follow the required steps for installing the brake pads and when you are installing the inboard pads, make sure that any wear indicators are sitting on top. Clip the abutment shims into the brake caliper adapter bracket and slide the brake pads in, so the one with the wear indicator is next to the axle body. Move the caliper piston all the way into the caliper bore to make space for the caliper when you are putting it on the adapter bracket. Attach the caliper over the brake pads on the brake caliper adapter bracket, with its guide pin bolts (2, 3) and be sure that the bolt with a special sleeve is placed in the upper mounting hole. Place the caliper guide pin bolt holes on the adapter bracket and attach the upper and lower caliper pin bolts firmly, with the special sleeve on the upper bolt. Use 43 Nm (32 ft. lbs.) of torque. Following this, connect the tire and wheel to the hub and tighten the wheel mounting nuts to 135 Nm (100 ft. lbs.). Lower your car and press the brake pedal a handful of times to connect the pads to the brake rotor. Make sure to check and top up the brake fluid, then use the car for a test drive to remove anything stuck on the brakes and settle the brake pads into position.

OEM Chrysler Sebring Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Brake Pads found

View related parts
Chrysler Sebring Brake Pads, Rear Part Number: 5135543AB
$57.69 MSRP: $99.00
You Save: $41.31 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Hardware Kit; Disc Brake Pad Set; Rear Pads
- Position: Rear
- Replaces: 5114424AA, 5114425AA, 5083071AA, 5135543AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, Limited, LX, LXi, Touring, TSi | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Brake Pads, Front Part Number: 68574695AA
$88.09 MSRP: $132.00
You Save: $43.91 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Parking Brake Shoe; Brake Shoes; Front Pads
- Position: Front
- Replaces: 5191229AA, 5191244AA, 5191231AA, 68020494AA, 68020494AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, Limited, LX, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Brake Pads, Front Part Number: 5018945AA
$29.59 MSRP: $162.00
You Save: $132.41 (82%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Pad Kit - Rear Disc Brake Part Number: 5191271AD
$61.84 MSRP: $156.00
You Save: $94.16 (61%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PAD KIT-REAR DISC BRAKE
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, Limited, LX, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Brake Pads, Rear Part Number: 68028671AA
$51.75 MSRP: $76.70
You Save: $24.95 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Rear Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Hardware Kit; Rear Pads; Pad Kit Rear Disc Brake; Disc Brake Pad Set
- Position: Rear
- Replaces: 68020256AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, Limited, LX, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Brake Pads, Front Part Number: 5018942AA
$38.40 MSRP: $48.68
You Save: $10.28 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chrysler Sebring | Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Brake Pads, Rear Part Number: 5093218AA
$65.03 MSRP: $95.70
You Save: $30.67 (33%)
Product Specifications
- Other Name: Shoe Kit - Rear Disc Brake; Rear Pads
- Position: Rear
- Replaces: 5012651AA, 5066641AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 2.4L L4, 2.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Rear Pads Part Number: MR205144
Product Specifications
- Other Name: Pad Kit; Pad Package, Rear Brake; Pad Package Disc Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1998 Chrysler Sebring | JX, JXi, LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Brake Pads Part Number: MR205143
Product Specifications
- Other Name: Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit Front Disc Brake; Pad Package, Front Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Brake Pads, Front Part Number: 5093021AA
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Brake Pads, Front Part Number: MR389537
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Brake Pads, Front Part Number: MR569588
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Brake Pads, Front Part Number: 68035576AA
Product Specifications
- Other Name: Pad Kit - Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Disc Brake
- Position: Front
- Replaces: 5191217AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited, LX, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Brake Pads, Front Part Number: MR569403
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Replaces: MR527674
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Limited, LX, LXi | 3.0L V6, 6 Cyl 3.0 L GAS

Chrysler Sebring Brake Pads

Choose OEM Brake Pads that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Brake Pads follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Brake Pads of Chrysler Sebring, which are the key parts that slow or stop the car, press against the brake rotoes, turning kinetic energy into heat. The Brake Pads each has a metal backing plate, bonded or riveted to a molded friction lining, plus in the Sebring system two pads sit on opposing sides of every rotor, where a caliper squeezes them during braking. As a result of continuous wear, the lining reaches a critical thickness. The Chrysler specification indicates minimum thickness that Chrysler will accept. Many Brake Pads include wear sensors or audible indicators that alert a driver when replacement is due. For the daily commute, original Chrysler equipment is engineered for constant, quiet operation. However, aggressive driving often provokes fade and greater stopping distances due to the heat generated. Sebring owners can choose from non-metallic, semi-metallic, fully metallic or ceramic Brake Pads so that they can use them in varied driving conditions. They contain combination of friction, durability and noise control. On any Chrysler vehicle, regular inspection and timely replacement of worn Brake Pads will maintain reliable Sebring braking performance and prevent rotors from excessive wear.

Chrysler Sebring Brake Pads Parts and Q&A

Brake Pads, Rear
68028671AA
Q:
How to Effectively Remove and Replace Brake Pads on Chrysler Sebring?
A:
You have to raise and support the vehicle before removing and replacing the brake pads. Remove the wheel mounting nuts and get rid of the tire and wheel as a set. Also, remember to put the upper bolt's sleeve into place in the upper mounting hole after you remove all the guide pin bolts. Following that, separate both Brake Caliper guide pin bolts. Remove the caliper from the adapter bracket, use a wire or bungee cord to hang it out of the way and keep the brake hose from over extending. Also, pull the brake pads off the caliper adapter bracket before you remove anything else.
Pad Kit - Rear Disc Brake
5191271AD
Q:
How to Install Brake Pads on Chrysler Sebring?
A:
On both sides, follow the required steps for installing the brake pads and when you are installing the inboard pads, make sure that any wear indicators are sitting on top. Clip the abutment shims into the brake caliper adapter bracket and slide the brake pads in, so the one with the wear indicator is next to the axle body. Move the caliper piston all the way into the caliper bore to make space for the caliper when you are putting it on the adapter bracket. Attach the caliper over the brake pads on the brake caliper adapter bracket, with its guide pin bolts (2, 3) and be sure that the bolt with a special sleeve is placed in the upper mounting hole. Place the caliper guide pin bolt holes on the adapter bracket and attach the upper and lower caliper pin bolts firmly, with the special sleeve on the upper bolt. Use 43 Nm (32 ft. lbs.) of torque. Following this, connect the tire and wheel to the hub and tighten the wheel mounting nuts to 135 Nm (100 ft. lbs.). Lower your car and press the brake pedal a handful of times to connect the pads to the Brake Rotor. Make sure to check and top up the brake fluid, then use the car for a test drive to remove anything stuck on the brakes and settle the brake pads into position.